Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1 M N
2 MbN: Select the entry to be blocked. a
M
N
3 MbN: “Save CID” a MOKN
4 MbN: “Nuisance Call Block” a
MOKN
5 MbN: “Yes” a MOKN a M
N
n By entering phone numbers:
1 M
N#217
2 MbN: “Single Number” a MOKN
3 M
N a MbN: “Add” a MOKN
4 Enter the phone number (24 digits
max.).
R To erase a digit, press MCN.
5 MOKN a M
N
Storing a range of numbers
1 M
N#217
2 MbN: “Range of Numbers” a MOKN
3 M
N a MbN: “Add” a MOKN
4 Enter the desired number (2-8 digits).
R To erase a digit, press MCN.
5 MOKN a M
N
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers.
1 M
N#240
2 MbN: Select the desired setting. a MOKN
3 M
N
Viewing/editing/erasing call
block numbers
1 M
N#217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 MbN: Select the desired entry.
R To exit, press M
N.
4 To edit a number:
M
N a Edit the number. a MOKN a
M
N
To erase a number:
M
N a MbN: “Yes” a MOKN a M N
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Erasing all call block numbers
1 M
N#217
2 MbN: “Single Number” or “Range of
Numbers” a MOKN
3 M
N a MbN: “Erase All” a MOKN
4 MbN: “Yes” a MOKN
5 MbN: “Yes” a MOKN a M
N
Other programming
Changing the handset name
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 3” is displayed.
1 M
N#104
2 Enter the desired name (10 characters
max.).
3 MOKN
26
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
