635694
27
Zoom out
Zoom in
Previous page
1/44
Next page
4 MbN: Select the desired setting. a MOKN
2 times a M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 M
N#256
2 Enter the base unit PIN (default: 0000).
R If you forget your PIN, see page 37.
3 Select the handsets to be restricted by
pressing 1 to 3.
R All handsets registered to the base unit
are displayed.
R
” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again.
disappears.
4 MOKN
5 Select a memory location by pressing 1
to 6. a MOKN
6 Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
N
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 37.
1 M
N#132
2 Enter the current 4-digit base unit PIN
(default: 0000).
3 Enter the new 4-digit base unit PIN. a
MOKN
4 MbN: Yes a MOKN a M
N
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 M
N#138
2 MbN: Select the desired setting. a MOKN
a M
N
Registering the DECT repeater
(KX-A405/KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Press and hold M
N for about 5 seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and indicator light
green.
3 Base unit:
To exit the registration mode, press M N.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
27
Programming
TGC310_320E(en)_1222_ver002.pdf 27 2014/12/22 11:04:36
27


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-kx-tgc312e

Reset search

  • HOW DO I INCREASE THE NUBER OF RINGS ON MY KXTGC312EIT GOES TO ANSAPHONE AFTERV5 RINGS AND I DONOT HAVE TIME TO ANSWER Submitted on 4-3-2022 at 12:37

    Reply Report abuse
  • HOW DO I UNCREASE THE NUMBER OFRINS ON MYKXTGC312E IT GOES TO ANSAPHONE AFTER ONLY 5 RINGS AND I DO NOT HAVE TIME TO GET TO THE 'PHONE Submitted on 4-3-2022 at 12:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGC312E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGC312E in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info