588652
18
Zoom out
Zoom in
Previous page
1/60
Next page
Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/help
Making calls
Using the base unit :
1Dial the phone number.
LTo correct a digit, press {CLEAR}.
2Lift the corded handset.
LAn available line is automatically selected
and either the LINE1 indicator or LINE2
indicator lights up. To change the line
selection mode, see page 17.
LYou can also select the line manually by
pressing {LINE 1} or {LINE 2} before lifting
the corded handset.
3When you finish talking, place the corded
handset on the cradle.
Note:
LYou can also dial the phone number after lifting
the corded handset.
LTo switch to the cordless handset, press {LINE
1} or {LINE 2} on the cordless handset, then
place the corded handset on the cradle.
Using the speakerphone
1During a conversation with the corded
handset, press {SP-PHONE} to turn on the
speakerphone.
LYou can place the corded handset on the
cradle.
LSpeak into the MIC.
LSpeak alternately with the other party.
2When you finish talking, press {SP-PHONE}.
Note:
LFor best performance, use the speakerphone in
a quiet environment.
LTo switch to the receiver, lift the corded handset.
Using the handset Y
1Lift the handset and dial the phone number.
LTo correct a digit, press {CLEAR}.
2{C}
LAn available line is automatically selected
and the line number is displayed. To change
the line selection mode, see page 17.
LYou can also select the line manually by
pressing {LINE 1} or {LINE 2}.
3When you finish talking, press {OFF} or place
the handset on the charger.
Note:
LThe LINE1 indicator or LINE2 indicator on the
base unit lights up while using the handset.
Using the speakerphone
1During a conversation, press {s} to turn on
the speakerphone.
LSpeak alternately with the other party.
2When you finish talking, press {OFF}.
Note:
LFor best performance, use the speakerphone in
a quiet environment.
LTo switch to the receiver, press {C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the
redial list in each unit (each 48 digits max.).
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Erasing a number in the redial list
1{REDIAL}
2{V}/{^}: Select the desired phone number.
i {ERASE}
3{V}/{^}: Yes i {SELECT}
4Proceed with the operation for your unit.
Base unit: {} (EXIT)
Handset: {OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
: Base unit / Y Handset
: Base unit / Y Handset
TG9391.book Page 18 Tuesday, July 8, 2008 8:01 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG9392 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG9392 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info