689693
30
Zoom out
Zoom in
Previous page
1/56
Next page
Programming
30
Special programming
Night mode
Night mode allows you to select a period of time
during which the handset and/or base unit will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Night mode can be set
independently for each handset and base unit.
Important:
L Set the date and time beforehand (page 14).
L Handset only: If you have set the alarm, the
alarm sounds even if the night mode is turned
on.
Setting the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Enter the desired hour and minute you wish to
start this feature. i {OK}
3 Enter the desired hour and minute you wish to
end this feature. i {OK}
4 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {} (EXIT)
Note:
L To correct a digit:
Handset: Press {<} or {>} to move the cursor
to the digit, then make the correction.
Base unit: Press {7} or {8} to move the
cursor to the digit, then make the correction.
Turning night mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: On or Off i {SAVE}
3 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {} (EXIT)
Note:
L When the night mode is turned on, 3 is
displayed.
Alarm
An alarm sounds at the set time for 3 minutes once
or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 14).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm option. i
{SELECT}
3 Enter the desired date and month.
4 Set the desired time. i {OK}
5 {V}/{^}: Select the desired ringer tone. i
{SELECT}
L We recommend selecting a ringer tone
different from the ringer tone set for outside
calls.
6 {SELECT} i {OFF}
L When the alarm is set, E is displayed.
Note:
L To stop the alarm, press any dial key or place
the handset on the base unit or charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L If you select Once, the setting changes to
Off after the alarm sounds.
L The ringer volume for alarm follows the higher
volume level of the 2 lines (page 28).
L When the ringer volume for outside calls of the 2
lines is set to off (page 28), the alarm sound is
heard at the low level.
Y Handset / [ Base unit
Y Handset / [ Base unit
Y Handset
Off Turns alarm off. Go to step 6.
Once An alarm sounds once at the set
time.
L If you select Arabic or
Persian as the display
language, enter the desired
month and date.
Daily An alarm sounds daily at the set
time. Go to step 4.
TG9385BX(e).book Page 30 Monday, November 2, 2009 1:26 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG9385 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG9385 in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info