511595
30
Zoom out
Zoom in
Previous page
1/56
Next page
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R Set the date and time beforehand
(page 14).
R We recommend turning the base unit ringer
off (page 26) in addition to turning the night
mode on.
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
(middle soft key) #238
2 MbN: Select the desired setting. a
R If you select Off, press M N to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a
R You can select 24-hour or 12-hour
clock format (AM or PM) by
pressing
.
4 Enter the desired hour and minute you
wish to end this feature. a
5 M N
R When the night mode is set,
is
displayed.
Changing the start and end time
1
(middle soft key) #237
2 Continue from step 3, “Turning night
mode on/off”, page 30.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select No Ringing,
the handset never rings during night mode.
1
(middle soft key) #239
2 MbN: Select the desired setting. a
a M N
Note:
R When the answering system answers the
call, this feature does not work.
Selecting categories to bypass night
mode
1
(middle soft key) #241
2 Select your desired categories by
pressing 1 to 9.
R ” is displayed next to the selected
category numbers.
R To cancel a selected category, press
the same dial key again.
disappears.
3 a M N
Changing the handset name
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is No. If you select
Yes without entering any handset name,
Handset 1 to Handset 6 is displayed.
1
(middle soft key) #104
2 Enter the desired name (max. 10
characters; page 45).
R If not required, go to step 3.
3
4 MbN: Select the desired setting. a 2
times
5 M N
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
30
Programming
TG816xAL(e)_0131_ver001.pdf 30 2012/01/31 20:20:20
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG8162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG8162 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic KX-TG8162

Panasonic KX-TG8162 User Manual - German - 60 pages

Panasonic KX-TG8162 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info