Making calls
1 Lift the handset and dial the phone
number.
R To correct a digit, press
.
2 Press M
N or .
3 When you finish talking, press M
N or
place the handset on the base unit or
charger.
Using the speakerphone
1 Dial the phone number and press M
N.
R Speak alternately with the other party.
2 When you finish talking, press M
N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
M
N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
(right soft key) or MEN (T)
2 MbN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1
(right soft key) or MEN (T)
2 MbN: Select the desired phone number.
a
3 MbN: “Yes” a a M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 22).
Example: If you need to dial the line access
number “0” when making outside calls with a
PBX:
1 0 a
2 Dial the phone number. a M N
Note:
R A 3 second pause is inserted each time
is pressed.
Answering calls
When a call is being received, the smart
function indicator flashes rapidly.
1 Lift the handset and press M
N or M N
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2 When you finish talking, press M
N or
place the handset on the base unit or
charger.
Using the smart function key
When the smart function indicator flashes
rapidly, press MSmart functionN.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 15).
You can finish talking by pressing M
N
without lifting up the handset.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M N. To turn this feature
on, see page 27.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
17
Making/Answering Calls