106277
27
Zoom out
Zoom in
Previous page
1/40
Next page
Multi-unit Operation
27
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Operating additional units
Additional handsets
Up to 5 handsets can be registered to a single
base unit.
Important:
L The additional handset model recommended for
use with this unit is noted on page 4. If other
model handset is used, certain operations
(handset settings, base unit settings, etc.) may
not be available.
L Additional handsets will give you the freedom to,
for example, have an intercom call with another
handset while a third handset is on an outside
call.
Additional base units
Handsets can be registered to up to 4 base units,
allowing you to add additional base units and
extend the area in which your handset(s) can be
used. You need to select the desired base unit to
use the handset with (page 27).
Registering a handset to a
base unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit (for example, w flashes
even when the handset is near the base unit),
register the handset.
1 Press and hold {x} on the base unit for about
5 seconds until a beep is heard.
L If all registered handsets start ringing, press
{x} to stop, then repeat this step.
L After a beep is heard, the rest of this
procedure must be completed within 1
minute.
2 {MENU} (right soft key) i r i {OK}
3 {^}/{V}: Registration i {OK}
4 {^}/{V}: Register Handset i {OK}
5 {^}/{V}: Select a base unit number. i {OK}
L This number is used by the handset as a
reference only.
L The registered base unit is indicated by “@”.
6 Enter PIN is displayed. Enter the base unit
PIN (default: 0000). i {OK}
L If you forget your PIN, consult your nearest
Panasonic service centre.
L When the handset has been registered
successfully, w will stop flashing. If the key
tone is turned on (page 16), a confirmation
tone will be heard.
Selecting a base unit
When a specific base unit is selected, the handset
will make and receive calls using that base unit
only. If the handset is out of range of that base unit,
no calls can be made.
1 {MENU} (right soft key) i r i {OK}
2 {^}/{V}: Select Base i {OK}
3 {^}/{V}: Select the desired base unit. i
{OK}
L The selected base unit is indicated by “t
located on the left of the item on the display.
L The handset starts searching for the base
unit.
Deregistering a handset
A handset can cancel its own registration (or the
registration of another handset) that is stored in the
base unit. This will allow the base unit to “forget”
the handset.
1 {MENU} (right soft key) i r i {OK}
2 {^}/{V}: Registration i {OK}
3 {^}/{V}: Deregistration i {OK}
4 Enter the base unit PIN (default: 0000). i
{OK}
L If you forget your PIN, consult your nearest
Panasonic service centre.
L The numbers of all handsets registered to
the base unit are displayed.
L The handset you are using is indicated by
t” located on the left of the item on the
display.
5 {^}/{V}: Select the handset(s) you want to
cancel. i {OK}
6 {YES} i {i}
Note:
L Register! is shown on the handset display
when you cancel registration.
TG8070-8090E(e).book Page 27 Monday, June 11, 2007 8:12 PM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG8093 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG8093 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info