DECT repeater
Problem Cause/solution
The unit does not work. R When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
R When the indicators do not light green, move the unit closer to
the base unit.
R Registration may have been cancelled. Deregister the unit, then
re-register.
Deregister:
1 Unplug the AC adaptor, then press and hold MPROGRAMN.
2 While pressing and holding MPROGRAMN, re-connect the
AC adaptor.
3 Keep holding to press MPROGRAMN for about 10 seconds
until the indicator stops flashing and lights red. Then
release MPROGRAMN.
R The
and indicators light amber for a moment
then only the
indicator flashes red.
R If the
indicator flashes green after releasing
MPROGRAMN, deregistration failed. Deregisterthe unit
again.
Re-register:
1 DECT repeater: Unplug the AC adaptor.
2 Base unit: Press and hold M
N for about 5 second, until
the registration tone sounds.
R The next step must be completed within 90 seconds.
3 DECT repeater: Connect the AC adaptor, then wait until
the indicator and indicator light green.
4 Base unit: To stop the registration tone, press M
N.
While talking using the
handset, sound cuts in
and out.
R The handset is out of range. Move the handset closer to this
unit.
A repeating tone is heard
while talking using the
handset.
or
The
indicator
continues to light amber
and the
indicator
flashes green.
R MPROGRAMN was pressed. The unit is in programming mode.
To exit, press MPROGRAMN again. Do not press MPROGRAMN,
except when deregistering the unit.
52
Useful Information
