588641

Panasonic KX-TG7871 Manual

68
Zoom out
Zoom in
Previous page
1/96
Next page
Error messages
Display message Cause/solution
Base no power
o
r
No link. Re-connect base
AC adaptor.
or
No link.
R T
he handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 47).
R When “No link.” is displayed during a power
failure, place a handset on the base unit to supply
power to the base unit.
Busy
R N
o cellular phone is paired to the base unit. Pair a
cellular phone (page 17).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
y
our access #
R You have not stored the voice mail access number.
Store the number (page 63).
Check tel line
R T
he supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).
R If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 19).
Error!!
R R
ecording was too short. Try again.
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 52). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed
R A
lthough the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R T
here is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 47).
Requires subscription to
C
aller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
68
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG78xx(en)_1210_ver101.pdf 68 2012/12/10 21:19:31
… 68 …


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-kx-tg7871

Reset search

  • change batteries on Panasonic KV-TG7871, but cannot activate telephone Submitted on 24-9-2023 at 19:22

    Reply Report abuse

  • All incoming calls are identified as “incoming call” Submitted on 8-10-2022 at 01:04

    Reply Report abuse

  • Is there a way of resetting the Time Zone on my Panasonic TG7871 phone; having moved permanently from AZ to FL, currently there is a 3 hours difference.
    I reset the time/date, but later, it always reverts to the original time in AZ?
    If not, is it because the phone number prefix is '520' whereas I am now in '352' land? Submitted on 6-6-2022 at 21:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG7871 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG7871 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info