588638
54
Zoom out
Zoom in
Previous page
1/96
Next page
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1 Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2 Handset:
MMENUN#621
3 If your headset PIN is 0000”, go to
step 4.
If your headset PIN is other than
0000”, press MCLEARN, then enter your
headset PIN.
R Typically, default PIN is 0000. Refer
to the headset operating instructions.
4 Press MOKN, then wait until a long beep
sounds.
5 MOFFN
R When
is displayed on the base
u
nit, the headset is available for use.
Connecting/disconnecting a headset
I
f you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
Handset / Base unit
1 T
o connect/disconnect:
MMENUN#622
R A long beep sounds.
2 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Unpairing a headset
Y
ou can cancel a pairing of the headset that is
stored to the base unit.
Handset
1 MM
ENUN#612
2 MbN: Yes a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
d
isplay.
3 MOFFN
Operating a Bluetooth wireless
h
eadset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
h
eadset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Switching between the base unit and
y
our headset
You can switch between the base unit and
your headset:
during a landline call with the base unit
speakerphone.
during an intercom call between the base
unit and handset.
while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M
N
on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
54
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
TG78xx(en)_1210_ver101.pdf 54 2012/12/10 21:19:30
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG7844 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG7844 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info