Sub-menu 1 Sub-menu 2 Settings Code
Auto talk
*13
– 1: On 0: <Off> #200 22
Set tel line
*3
Set recall
time
*1, *14
,
*15
0: 900 ms
1: 700 ms
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: <100 ms>
8: 90 ms9: 80 ms
#121 23
Set line mode
*1, *16
1: A 2: <B> #122 –
Privacy mode
*1
– 1: On 0: <Off> #194 23
Repeater mode
*1
– 1: <On> 0: Off #138 58
Registration Register handset
– #130 39
Deregistration
*2
– #131 39
Country
*1
– 1: <Australia>
2: Newzealand
#136 38
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only
available in direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed
(page 18).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*8 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a
dial tone or no one on the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*10 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off,
select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*11 This tone lets you know when you receive an outside call while you are on
another line or an intercom call. If you select “On”, the tone sounds 2 times.
34
Programming
