Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 28).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 9 a MPAUSEN
2 Dial the phone number. a M
N
Note:
R A 3 second pause is inserted each
time MPAUSEN is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press M
N or
M N when the unit rings.
R To answer a cellular call, you can
also press MCELLN.
R You can also answer the call by
pressing any dial key from 0 to
9, *, or #. (Any key answer
feature)
2 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting
the handset off the base unit or charger.
You do not need to press M
N. To turn
this feature on, see page 34.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select
the desired volume.
n Programming the volume
beforehand:
1 To change the cellular line
ringer volume:
For CELL 1:
MMENUN#6281
For CELL 2:
MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
2 MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing M
N.
Adjusting the base unit ringer volume
n While the base unit is ringing for an
incoming call:
Press MjN or MkN repeatedly to
select the desired volume.
R To turn the ringer off, press and
hold MkN until the unit beeps.
n Programming the volume
beforehand:
1 To change the cellular line
ringer volume:
For CELL 1:
MMENUN#*6281
For CELL 2:
MMENUN#*6282
To change the landline ringer
volume:
MMENUN#*160
22
Making/Answering Calls
