*7 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*8 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*10 This setting is available when you have the key finder (KX-TGA20FX). Read the installation
guide for more information on the key finder.
*11 For models with supplied key finders, the display shows “1: Finder1”.
*12 If you register 2 or more key finders.
*13 If you have 2 or more key finders.
*14 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*16 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*17 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 34):
“Česká rep.” = “100 msec.”
“Slovensko” = “100 msec.”
*18 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*19 KX-TG6811 series: page 3
*20 KX-TG6821 series: this menu icon is displayed when the key finder is not registered.
*21 KX-TG6811 series (including KX-TG6881): this menu icon is displayed when the key finder
is not registered.
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 16).
1 M N#720
2 Select an alarm by pressing 1 to 3. a
MOKN
3 MbN: Select the desired alarm option. a
MOKN
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
31
Programming
