588440
48
Zoom out
Zoom in
Previous page
1/64
Next page
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
For assistance, visit our Web site: http://www.panasonic.com/help for
customers in the U.S.A. or Puerto Rico.
Before initial use, see “Getting
Started” on page 10.
Consulte “Guía Rápida Española”, página 56.
Please register your product: http://www.panasonic.com/prodreg
Operating Instructions
Expandable Digital Cordless Answering System
Model shown is KX-TG6511.
KX-TG6524
KX-TG6525
KX-TG6572
KX-TG6531
KX-TG6532
KX-TG6533
KX-TG6534
KX-TG6541
KX-TG6542
KX-TG6543
KX-TG6544
KX-TG6545
Model No.
KX-TG6522
KX-TG6523
Expandable Digital Cordless Phone
Model No. KX-TG6511
KX-TG6512
KX-TG6513
TG6511(e).book Page 1 Wednesday, April 28, 2010 4:35 PM
Table of Contents
2
Introduction
Model composition . . . . . . . . . . . . . . . 3
Accessory information. . . . . . . . . . . . . 4
Important Information
For your safety . . . . . . . . . . . . . . . . . . 7
Important safety instructions . . . . . . . . 8
For best performance . . . . . . . . . . . . . 8
Other information. . . . . . . . . . . . . . . . . 9
Specifications . . . . . . . . . . . . . . . . . . . 9
Getting Started
Setting up . . . . . . . . . . . . . . . . . . . . . 10
Note when setting up. . . . . . . . . . . . . 11
Intelligent eco mode . . . . . . . . . . . . . 11
Controls. . . . . . . . . . . . . . . . . . . . . . . 12
Belt clip . . . . . . . . . . . . . . . . . . . . . . . 14
Display. . . . . . . . . . . . . . . . . . . . . . . . 14
Initial settings. . . . . . . . . . . . . . . . . . . 14
Making/Answering Calls
Making calls. . . . . . . . . . . . . . . . . . . . 16
Answering calls . . . . . . . . . . . . . . . . . 17
Useful features during a call . . . . . . . 18
Shared Phonebook
Shared phonebook . . . . . . . . . . . . . . 20
Programming
Programmable settings . . . . . . . . . . . 23
Special programming . . . . . . . . . . . . 29
Registering a unit . . . . . . . . . . . . . . . 31
Caller ID Service
Using Caller ID service . . . . . . . . . . . 33
Caller list . . . . . . . . . . . . . . . . . . . . . . 34
Answering System
Answering system. . . . . . . . . . . . . . . 36
Turning the answering system on/off. 36
Greeting message. . . . . . . . . . . . . . . 37
Listening to messages using the base
unit . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Listening to messages using the
handset . . . . . . . . . . . . . . . . . . . . . . . 38
Voice memo. . . . . . . . . . . . . . . . . . . . 39
Remote operation . . . . . . . . . . . . . . . 39
Answering system settings . . . . . . . . 41
Voice Mail Service
Voice mail service. . . . . . . . . . . . . . . 43
Intercom/Locator
Intercom . . . . . . . . . . . . . . . . . . . . . . 45
Handset locator . . . . . . . . . . . . . . . . 45
Transferring calls, conference calls . 46
Useful Information
Wall mounting. . . . . . . . . . . . . . . . . . 47
Error messages . . . . . . . . . . . . . . . . 48
Troubleshooting . . . . . . . . . . . . . . . . 49
FCC and other information. . . . . . . . 54
Guía Rápida Española
Guía Rápida Española . . . . . . . . . . . 56
Appendix
Customer services . . . . . . . . . . . . . . 60
Warranty (For United States and Puerto
Rico). . . . . . . . . . . . . . . . . . . . . . . . . 61
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . 63
TG6511(e).book Page 2 Wednesday, April 28, 2010 4:35 PM
Introduction
3
For assistance, please visit http://www.panasonic.com/help
Model composition
KX-TG6511 series KX-TG6521/
KX-TG6531 series
KX-TG6541 series
L Model shown is
KX-TG6512.
L Model shown is
KX-TG6522.
L Model shown is
KX-TG6542.
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG6511
series
KX-TG6511 KX-TG6511 KX-TGA652 1
KX-TG6512 KX-TG6511 KX-TGA652 2
KX-TG6513 KX-TG6511 KX-TGA652 3
KX-TG6521
series
KX-TG6522 KX-TG6531 KX-TGA653 2
KX-TG6523 KX-TG6531 KX-TGA653 3
KX-TG6524 KX-TG6531 KX-TGA653 4
KX-TG6525 KX-TG6531 KX-TGA653 5
KX-TG6572 KX-TG6521 KX-TGA653 2
KX-TG6531
series
KX-TG6531 KX-TG6531 KX-TGA652 1
KX-TG6532 KX-TG6531 KX-TGA652 2
KX-TG6533 KX-TG6531 KX-TGA652 3
KX-TG6534 KX-TG6531 KX-TGA652 4
KX-TG6541
series
KX-TG6541 KX-TG6541 KX-TGA652 1
KX-TG6542 KX-TG6541 KX-TGA652 2
KX-TG6543 KX-TG6541 KX-TGA652 3
KX-TG6544 KX-TG6541 KX-TGA652 4
KX-TG6545 KX-TG6541 KX-TGA652 5
TG6511(e).book Page 3 Wednesday, April 28, 2010 4:35 PM
Introduction
4
For assistance, please visit http://www.panasonic.com/help
Feature differences
ENERGY STAR
Accessory information
Supplied accessories
Series
Answering
system
Talking
Caller
ID
Headset
jack
Call with
base
unit
*1
Intercom
*2
| N
*3
KX-TG6511
series
––r ––
KX-TG6521
series
rr––
KX-TG6531
series
rrr––
KX-TG6541
series
rrrr r
*1 Calls can be made or answered with the base unit.
*2 Single handset models: Intercom calls can be made between handsets by
purchasing and registering one or more optional handsets (page 6).
*3 Intercom calls can be made between the base unit and handset.
As an ENERGY STAR
®
Partner,
Panasonic has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
ENERGY STAR is a U.S. registered
mark.
No.
Supplied handset qty. 1 unit
*1
2 unit
*2
3 unit
*3
4 unit
*4
5 unit
*5
Accessory item/
Order number
Accessory quantity
1 AC adaptor/PQLV219Y 12345
2 Telephone line cord/
PQJA10075Z
11111
TG6511(e).book Page 4 Wednesday, April 28, 2010 4:35 PM
Introduction
5
For assistance, please visit http://www.panasonic.com/help
*1 KX-TG6511/KX-TG6531/KX-TG6541
*2 KX-TG6512/KX-TG6522/KX-TG6572/KX-TG6532/KX-TG6542
*3 KX-TG6513/KX-TG6523/KX-TG6533/KX-TG6543
*4 KX-TG6524/KX-TG6534/KX-TG6544
*5 KX-TG6525/KX-TG6545
*6 The handset cover comes attached to the handset.
*7 PNLC1010ZB: Black, PNLC1010YR: Wine red, PNLC1010YC: Dark blue metallic
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 60).
*1 Replacement batteries may have a different capacity from that of the supplied
batteries.
3 Rechargeable batteries/
HHR-4DPA (Part No.
HHR-55AAABU or
N4DHYYY00004)
246810
4 Handset cover
*6
/
PNYNTGA652BR
12345
5 Belt clip/PNKE1054Z1 12345
6 Charger
*7
–1234
123456
Accessory item Order number
Rechargeable
batteries
HHR-4DPA
*1
L To order, please call 1-800-332-5368 or visit
http://www.panasonic.com/batterystore
Battery type:
Nickel metal hydride (Ni-MH)
2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA94, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Battery back-up
power supply
KX-TCA230
No.
Supplied handset qty. 1 unit
*1
2 unit
*2
3 unit
*3
4 unit
*4
5 unit
*5
Accessory item/
Order number
Accessory quantity
TG6511(e).book Page 5 Wednesday, April 28, 2010 4:35 PM
Introduction
6
For assistance, please visit http://www.panasonic.com/help
Expanding your phone system
Optional handset feature overview
You can expand your phone system by registering optional handsets (6 max.) to a
single base unit.
L Optional handsets may be a different color from that of the supplied handsets.
*1 This feature allows you to select how the display shows:
multiple items at a time
1 item at a time in large characters
*2 The unit displays a list of all recorded messages and allows you to select the item
to play back.
Range extender
Feature KX-TGA651 KX-TGA401 KX-TGA750
Handset
Display size 1.8 inches 1.8 inches 2.1 inches
Button size Large Extra large Large
Display mode
*1
––r
Message list
*2
––r
By installing this unit, you can extend the
range of your phone system to include areas
where reception was previously not
available. Up to 2 range extenders can be
registered to the base unit. This product can
be purchased online. Please visit our Web
site:
http://www.panasonic.com/RangeExtender
Range extender: KX-TGA405
TG6511(e).book Page 6 Wednesday, April 28, 2010 4:35 PM
Important Information
7
For assistance, please visit http://www.panasonic.com/help
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
L Use only the power source marked on the
product.
L Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
L Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
L Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at 1-800-211-
PANA (1-800-211-7262).
L Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical shock,
do not expose the product to rain or any
type of moisture.
L Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
L Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.92
GHz to 1.93 GHz, and the RF transmission
power is 115 mW (max.).)
L Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
L Never install telephone wiring during an
electrical storm.
L Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
L This product is unable to make calls when:
the handset batteries need recharging or
have failed.
there is a power failure.
TG6511(e).book Page 7 Wednesday, April 28, 2010 4:35 PM
Important Information
8
For assistance, please visit http://www.panasonic.com/help
Battery
L We recommend using the batteries noted
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
L Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
L Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-822-
8837) for information on how to recycle this
battery.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
L For maximum coverage and noise-free
communications, place your base unit:
at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
L Coverage and voice quality depends on the
local environmental conditions.
L If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
Environment
L Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
L The product should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the
product.
TG6511(e).book Page 8 Wednesday, April 28, 2010 4:35 PM
Important Information
9
For assistance, please visit http://www.panasonic.com/help
L When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
L Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer, or
return
L This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
Specifications
Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
Frequency range:
1.92 GHz to 1.93 GHz
RF transmission power:
115 mW (max.)
Power source:
120 V AC, 60 Hz
Power consumption:
Base unit
*1
:
Standby: Approx. 1.0 W
Maximum: Approx. 4.0 W
Base unit
*2
:
Standby: Approx. 1.1 W
Maximum: Approx. 4.4 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.6 W
Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
*1 KX-TG6511/KX-TG6521/KX-TG6531
series: page 3
*2 KX-TG6541 series: page 3
Note:
L Design and specifications are subject to
change without notice.
L The illustrations in these instructions may
vary slightly from the actual product.
TG6511(e).book Page 9 Wednesday, April 28, 2010 4:35 PM
Getting Started
10
For assistance, please visit http://www.panasonic.com/help
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219.
Base unit
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
Charger
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
the charge indicator goes off and
Fully charged is displayed.
DSL/ADSL filter*
Hook
“Click”
Press plug firmly.
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
Correct Wrong
(120 V AC, 60 Hz)
Hooks
Rechargeable Ni-MH ONLY
Confirm Charging is displayed.
Charge indicator
TG6511(e).book Page 10 Wednesday, April 28, 2010 4:35 PM
Getting Started
11
For assistance, please visit http://www.panasonic.com/help
Note when setting up
Note for connections
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 5).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 5.
Note for battery installation
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
5, 8.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends (S,
T) or the unit contacts.
Note for battery charge
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
*1 If Eco mode is on.
Note:
L Actual battery performance depends
on usage and ambient environment.
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Intelligent eco mode
This feature automatically reduces
handset power consumption by
suppressing handset transmission
power when the handset is close to the
base unit.
L When this feature is activated, i is
displayed.
Icon Battery level
& High
( Medium
) Low
0)4 Needs charging.
0 Empty
Operation Operating time
In continuous
use
13 hours max.
*1
Not in use
(standby)
11 days max.
*1
TG6511(e).book Page 11 Wednesday, April 28, 2010 4:35 PM
Getting Started
12
For assistance, please visit http://www.panasonic.com/help
L Eco mode is turned off when the
clarity booster is activated (page 19).
Controls
Handset (KX-TGA652)
A Charge indicator
Ringer indicator
Message indicator
B Nonslip pad
L Nonslip pad offers support when
you cradle the handset between
your shoulder and ear.
C Speaker
D {C } (TALK)
E {s} (SP-PHONE: Speakerphone)
F Headset jack
(KX-TG6511/KX-TG6531/
KX-TG6541 series: page 3)
G Dial keypad ({*}: TONE)
H Receiver
I Display
J {OFF}
K {FLASH} {CALL WAIT}
L Microphone
M Charge contacts
Control type
A Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
B Navigator key
{^}, {V}, {<}, or {>}: Scroll through
various lists and items.
? VOL. (Volume: {^} or {V}):
Adjust the receiver or speaker
volume while talking.
{<} CID (Caller ID): View the caller
list.
{>} REDIAL: View the redial list.
Base unit
KX-TG6511 series (page 3)
A Charge contacts
B C
M
A
G
F
D
E
J
K
I
H
L
A
B
A B
C
TG6511(e).book Page 12 Wednesday, April 28, 2010 4:35 PM
Getting Started
13
For assistance, please visit http://www.panasonic.com/help
B {x} (LOCATOR)
C Bracket
*1
KX-TG6521/KX-TG6531 series
(page 3)
A Charge contacts
B Speaker
C {ERASE}
D {} (STOP)
E {^}/{V} (VOL.: Volume up/down)
{7}/{8} (Repeat/Skip)
F {6} (Play)
Message indicator
G {LOCATOR}
H {ANSWER ON}
ANSWER ON indicator
I Bracket
*1
KX-TG6541 series (page 3)
A Charge contacts
B Speaker
C {} (STOP)
D {ERASE}
E {^}/{V} (VOL.: Volume up/down)
{7}/{8} (Repeat/Skip)
F {6} (Play)
Message indicator
G {ANSWER ON}
ANSWER ON indicator
H {LOCATOR} {INTERCOM}
I Dial keypad ({*}: TONE)
J {REDIAL} {PAUSE}
K {HOLD}
L {SP-PHONE} (Speakerphone)
SP-PHONE indicator
M Microphone
N {FLASH} {CALL WAIT}
O {MUTE}
P {CONF} (Conference)
Q {MEMO}
R Bracket
*1
*1 The base unit has an unremovable
bracket for desk or wall mounting. To
mount on a wall, see page 47.
F G
A B
HI
DC E
ABCDEFG H
NI JKL OP
Q RM
TG6511(e).book Page 13 Wednesday, April 28, 2010 4:35 PM
Getting Started
14
For assistance, please visit http://www.panasonic.com/help
Belt clip
Display
Handset display items
*1 KX-TG6521/KX-TG6531/KX-TG6541
series: page 3
Initial settings
Display language
You can select either English or
Español as the display language.
The default setting is English.
1 {MENU} i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Voice guidance language
You can select either English or
Español as the voice guidance
language of the answering system. The
default setting is English.
1 {MENU} i {#}{1}{1}{2}
2 {V}/{^}: Select the desired setting.
To attach To remove
Item Meaning
w Within base unit range
_ Out of base unit range
C The line is in use.
L When flashing:
The call is put on
hold.
L When flashing
rapidly: An incoming
call is now being
received.
i Eco mode is on. (page
11)
s Speakerphone is on.
(page 16)
~ Ringer volume is off.
(page 27)
& Silent mode is on.
(page 29)
! Privacy mode is on.
(page 19)
E Alarm is on. (page 29)
m Handset number
& Battery level
$ Blocked call (page 30)
( Clarity booster is on.
(page 19)
In use Answering system is
being used by another
handset or the base
unit.
*1
Line in
use
Someone is using the
line.
Symbol meaning:
Example: {V}/{^}: Off
Press {V} or {^} to select the words in
quotations.
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
series (page 3)
Item Meaning
TG6511(e).book Page 14 Wednesday, April 28, 2010 4:35 PM
Getting Started
15
For assistance, please visit http://www.panasonic.com/help
3 {SAVE} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is Tone.
Tone: For tone dial service.
Pulse: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2010
{0}{7} {1}{5} {1}{0}
3 {OK}
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
5 {AM/PM}: Select AM or PM.
6 {SAVE} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG6511(e).book Page 15 Wednesday, April 28, 2010 4:35 PM
Making/Answering Calls
16
For assistance, please visit http://www.panasonic.com/help
Making calls
Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2 Press {C} or {CALL}.
3 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 {REDIAL} or {>} REDIAL
L If there is a new message in the
voice mail or answering system,
{REDIAL} is not displayed.
2 {V}/{^}: Select the desired phone
number.
3 {C}
Erasing a number in the redial list
1 {REDIAL} or {>} REDIAL
2 {V}/{^}: Select the desired phone
number. i {ERASE}
3 {V}/{^}: Yes i {SELECT}
4 {OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 22).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE}
2 Dial the phone number. i {C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Using the base unit
1
{SP-PHONE}
2 Dial the phone number.
3 When the other party answers,
speak into the microphone.
L Speak alternately with the other
party.
4 When you finish talking, press {SP-
PHONE}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 16 Wednesday, April 28, 2010 4:35 PM
Making/Answering Calls
17
For assistance, please visit http://www.panasonic.com/help
L While on a call, you can switch from
the base unit to the handset:
Press {C} on the handset, then
press { SP-PHONE} on the base
unit with the privacy mode off (page
19).
If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press {^} or {V} repeatedly while
talking.
Redialing the last number dialed
{SP-PHONE} i {REDIAL}
Answering calls
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 26.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 25).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing {~}.
Adjusting the base unit ringer
volume
Press {^} or {V} repeatedly to select the
desired volume.
L To turn the ringer off, press and hold
{V} until the unit beeps.
Note:
L Even when the ringer volume is set to
off, the base unit still rings for intercom
calls (page 45). (KX-TG6541 series:
page 3)
Using the base unit
When a call is being received, the SP-
PHONE indicator flashes rapidly.
1 Press {SP-PHONE} when the unit
rings.
2 Speak into the microphone.
3 When you finish talking, press {SP-
PHONE}.
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
series (page 3)
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 17 Wednesday, April 28, 2010 4:35 PM
Making/Answering Calls
18
For assistance, please visit http://www.panasonic.com/help
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1 Press {MENU} during an outside
call.
2 {V}/{^}: Hold i {SELECT}
3 To release hold, press {C}.
L Another handset user can take
the call by pressing {C}.
L The base unit user can take the
call by pressing {SP-PHONE}.
(KX-TG6541 series: page 3)
1 Press {HOLD} during an outside
call.
2 To release hold, press {SP-
PHONE}.
L A handset user can take the call
by pressing {C}.
Note for handset and base unit:
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound
and the ringer indicator on the
handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
L If another phone is connected to the
same line (page 11), you can also take
the call by lifting its handset.
L While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes. (KX-TG6541 series: page 3)
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1 Press {MUTE} during conversation.
L{MUTE} flashes.
2 To return to the conversation, press
{MUTE} again.
Note:
L{MUTE} is a soft key visible on the
handset display during a call.
1 Press {MUTE} during conversation.
L The SP-PHONE indicator on the
base unit flashes.
2 To return to the conversation, press
{MUTE} again.
Flash
{FLASH} allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L To change the flash time, see page
26.
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 18 Wednesday, April 28, 2010 4:35 PM
Making/Answering Calls
19
For assistance, please visit http://www.panasonic.com/help
For call waiting or Call Waiting
Caller ID service users
To use call waiting, you must first
subscribe to call waiting from your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on the
handset.
1 Press {CALL WAIT} to answer the
2nd call.
2 To switch between calls, press
{CALL WAIT}.
Note:
L Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
Handset clarity booster
This feature can improve sound clarity
when the handset is used in an area
where there may be interference. During
an outside call, this feature is turned on
automatically when necessary.
L When this feature is turned on, (
is displayed.
Call share
This feature allows you to join an
existing outside call.
Important:
L When the privacy mode is on, you
cannot join the conversation. Turn it
off.
To join the conversation, press {C}
when the other handset is on an outside
call.
To join the conversation, press {SP-
PHONE} when the handset is on an
outside call.
Note for handset and base unit:
L A maximum of 4 parties (including 1
outside party) can join a conversation
using 3 extensions. (4-way
conference)
Privacy mode
When the privacy mode is On, the unit
prevents other users from joining your
conversations with outside callers. To
allow other users to join your
conversations (call share), leave this
feature off. The default setting is Off.
1 {MENU} i {#}{1}{9}{4}
2 {V}/{^}: Select On or Off.
3 {SAVE} i {OFF}
L When the privacy mode is turned
on, ! is displayed during an
outside call.
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 19 Wednesday, April 28, 2010 4:35 PM
Shared Phonebook
20
For assistance, please visit http://www.panasonic.com/help
Shared phonebook
The shared phonebook allows you to
make calls without having to dial
manually. Any handset registered to the
base unit can use the shared
phonebook. You can add 50 names and
phone numbers to the shared
phonebook, and assign each
phonebook entry to the desired group.
Important:
L Only 1 person can access the shared
phonebook at a time.
L Caller ID subscribers can use group
ringer tone features (page 34).
Adding entries
1
{C} i {ADD}
2 Enter the party’s name (16
characters max.). i {OK}
3 Enter the party’s phone number (24
digits max.). i {OK}
4 {V}/{^}: Select the desired group.
i {SELECT} 2 times
L To add other entries, repeat from
step 2.
5 {OFF}
Character table for entering names
While entering characters, you can
switch between uppercase and
lowercase by pressing {*} (Aa).
L To enter another character that is
located on the same dial key, first
press {>} to move the cursor to the
next space.
L If you do not press any dial key within
5 seconds after entering a character,
the character is fixed and the cursor
moves to the next space.
Correcting a mistake
Press {<} or {>} to move the cursor to
the character or number you want to
erase, then press {CLEAR}. Enter the
appropriate character or number.
L Press and hold {CLEAR} to erase all
characters or numbers.
Groups
Groups can help you find entries in the
phonebook quickly and easily. When
adding an entry to the phonebook, you
can assign it to one of 9 groups. You can
change the names of groups assigned
for phonebook entries (“Friends”,
“Family”, etc.) and then search for
phonebook entries by group. The group
Key Character
{1} Space & ( ) ;
,–./1
{2} ABC2
abc2
{3} DEF3
def3
{4} GHI 4
ghi 4
{5} JKL5
jkl5
{6} MNO6
mn o 6
{7} PQRS7
pqrs7
{8} TUV8
tuv8
{9} WX Y Z 9
wxyz9
{0} Space 0
{#} #
Key Character
TG6511(e).book Page 20 Wednesday, April 28, 2010 4:35 PM
Shared Phonebook
21
For assistance, please visit http://www.panasonic.com/help
ringer tone feature is available for Caller
ID subscribers (page 34).
Changing group names
The default group name is Group 1 to
Group 9.
1 {C} i {MENU}
2 {V}/{^}: Group i {SELECT}
3 {V}/{^}: Select the desired group.
i {SELECT}
4 {V}/{^}: Group name i
{SELECT}
5 Edit the name (10 characters max.;
page 20). i { SAVE}
6 {OFF}
Finding and calling a
phonebook entry
Scrolling through all entries
1 {C}
2 {V}/{^}: Select the desired entry.
3 {C}
Searching by first character
1 {C}
2 Press the dial key ({0}{9} or {#})
which contains the character you
are searching for (page 20).
L Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3 {V}/{^}: Scroll through the
phonebook if necessary.
4 {C}
Searching by group
1 {C} i {GROUP}
2 {V}/{^}: Select the group you want
to search. i {SELECT}
L If you select All groups, the
unit ends the group search.
3 {V}/{^}: Select the desired entry.
4 {C}
Editing entries
1
Find the desired entry (page 21).
i {EDIT}
2 Edit the name if necessary (16
characters max.; page 20). i
{OK}
3 Edit the phone number if necessary
(24 digits max.). i {OK}
4 {V}/{^}: Select the desired group
(page 20). i {SELECT}
5 {SELECT} i {OFF}
Erasing entries
Erasing an entry
1 Find the desired entry (page 21).
2 {ERASE}
3 {V}/{^}: Yes i {SELECT} i
{OFF}
Erasing all entries
1 {C} i {MENU}
2 {V}/{^}: Erase all i
{SELECT}
3 {V}/{^}: Yes i {SELECT}
4 {V}/{^}: Yes i {SELECT}
5 {OFF}
TG6511(e).book Page 21 Wednesday, April 28, 2010 4:35 PM
Shared Phonebook
22
For assistance, please visit http://www.panasonic.com/help
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
1 During an outside call, press
{MENU}.
2 {V}/{^}: Phonebook i
{SELECT}
3 {V}/{^}: Select the desired entry.
4 Press {CALL} to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 16).
L If you have rotary/pulse service, you
need to press {*} (TONE) before
pressing {MENU} in step 1 to change
the dialing mode temporarily to tone.
When adding entries to the
phonebook, we recommend adding
{*} (TONE) to the beginning of
phone numbers you wish to chain dial
(page 20).
TG6511(e).book Page 22 Wednesday, April 28, 2010 4:35 PM
Programming
23
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
scrolling through the display menus (page 23)
using the direct commands (page 25)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 25 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
\
––34
Answering device
e
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
page 3)
Play new msg. –38
Play all msg. –38
Erase all msg.
*1
–39
Greeting Record greeting
*1
37
Check greeting 37
Pre-recorded
*1
37
Settings Ring count
*1
41
Recording time
*1
41
Remote code
*1
39
Screen call 36
Answer on
*1
–36
Answer off
*1
–36
V.M. access
g
––44
Intercom
4
––45
TG6511(e).book Page 23 Wednesday, April 28, 2010 4:35 PM
Programming
24
For assistance, please visit http://www.panasonic.com/help
Set date & time
e
Date and time
*1
–15
Alarm –29
Time
adjustment
*1
––
Initial setting
c
Ringer setting Ringer volume
Ringer tone
Silent mode
On/Off
Start/End
29
Set date & time Date and time
*1
15
Alarm 29
Time adjustment
*1
Talking Caller
ID
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
page 3)
Handset 33
Base unit
*1
Handset name –30
Call block
*1
–30
Voice mail Store VM access#
*1
43
VM tone detect
*1
43
Message alert –42
Display setting LCD Contrast
Key tone ––
Caller ID edit –35
Auto talk –17
Set tel line Set dial mode
*1
15
Set flash time
*1
18
Set line mode
*1
Privacy mode
*1
–19
Registration Register handset 31
Change language Display 14
Voice prompt
*1
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
page 3)
14
Main menu Sub-menu 1 Sub-menu 2 Page
TG6511(e).book Page 24 Wednesday, April 28, 2010 4:35 PM
Programming
25
For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired code.
3 Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Customer support
a
––
Feature Code Setting System
*1
Page
Caller list {2}{1}{3} ––34
V.M. access
(V.M.: Voice mail)
{3}{3}{0} ––44
Intercom {2}{7}{4} ––45
Date and time {1}{0}{1} r 15
Alarm {7}{2}{0}{1}: Once {2} : Daily
{0}: <Off>
–29
Time
adjustment
*2
{2}{2}{6}{1}: <Caller ID auto>
{0}: Manual
r
Ringer volume
*3
(Handset)
{1}{6}{0}{1}{6}: Level 1–6 <6>
{0}: Off
––
Ringer tone
(Handset)
*4,
*5,
*6
{1}{6}{1}{1}{5}: Tone 15
<Tone 1>
{6}{0}: Melody 15
––
Silent mode
(On/Off)
{2}{3}{8}{1}: On {0} : <Off>–29
Silent mode
(Start/End)
{2}{3}{7} <11:00 PM/06:00 AM>– 30
Handset name {1}{0}{4} ––30
Call block {2}{1}{7} r 30
Block w/o num
(Block calls without
phone number)
{2}{4}{0}{1}: On {0} : <Off> r 31
Main menu Sub-menu 1 Sub-menu 2 Page
TG6511(e).book Page 25 Wednesday, April 28, 2010 4:35 PM
Programming
26
For assistance, please visit http://www.panasonic.com/help
For the Talking Caller ID feature (KX-TG6521/KX-TG6531/KX-TG6541 series:
page 3)
Store VM
access#
(VM: Voice mail)
{3}{3}{1} r 43
VM tone detect {3}{3}{2}{1}: <On> {0}: Off r 44
Message alert {3}{4}{0}{1}: <On> {0}: Off –42
LCD Contrast
(Display contrast)
{1}{4}{5}{1}{6}: Level 1–6 <3>
Key tone
*7
{1}{6}{5}{1}: <On> {0}: Off ––
Caller ID edit
(Caller ID number
auto edit)
{2}{1}{4}{1}: <On> {0}: Off –35
Auto talk
*8
{2}{0}{0}{1}: On {0} : <Off>–17
Set dial mode {1}{2}{0}{1}: Pulse {2} : <Tone> r 15
Set flash
time
*9
{1}{2}{1}{0}: 900 ms
{1}: <700 ms>
{2}: 600 ms {3}: 400 ms
{4}: 300 ms {5}: 250 ms
{*}: 200 ms {#}: 160 ms
{6}: 110 ms {7}: 100 ms
{8}: 90 ms {9}: 80 ms
r 18
Set line
mode
*10
{1}{2}{2}{1}: A {2}: <B> r
Privacy mode {1}{9}{4}{1}: On {0} : <Off> r 19
Register
handset
{1}{3}{0} ––31
Deregistration {1}{3}{1} ––32
Display
(Change language)
{1}{1}{0}{1}: <English>
{2}: Español
–14
Customer
support
*11
{6}{8}{0} ––
Feature Code Setting System
*1
Page
Talking Caller
ID (Handset)
{1}{6}{2}{1}: <On> {0}: Off –33
Talking Caller
ID (Base unit)
{*}{1}
{6}{2}
{1}: On {0}: <Off> r 33
Feature Code Setting System
*1
Page
TG6511(e).book Page 26 Wednesday, April 28, 2010 4:35 PM
Programming
27
For assistance, please visit http://www.panasonic.com/help
For the answering system (KX-TG6521/KX-TG6531/KX-TG6541 series: page 3)
*1 If “System” column is checked, you do not need to program the same item using
another handset.
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select Caller ID auto. To turn this feature off, select
Manual. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls. However even when the ringer volume is set to off, the handset
still rings for alarm (page 29), intercom calls, and paging (page 45).
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
Feature Code Setting System
*1
Page
Play new msg.
(msg.: message)
{3}{2}{3} ––38
Play all msg. {3}{2}{4} ––38
Erase all msg. {3}{2}{5} r 39
Record
greeting
{3}{0}{2} r 37
Check greeting {3}{0}{3} ––37
Pre-recorded
(Reset to pre-
recorded greeting)
{3}{0}{4} r 37
Ring count {2}{1}{1} 27 rings <4 rings>
Toll saver
r 41
Recording time {3}{0}{5} 1 min <3 min>
Greeting only
r 41
Remote code {3}{0}{6} <111> r 39
Screen call {3}{1}{0} <On> Off –36
Answer on {3}{2}{7} r 36
Answer off {3}{2}{8} r 36
Voice prompt
(Change language)
{1}{1}{2}{1}: <English>
{2}: Español
r 14
TG6511(e).book Page 27 Wednesday, April 28, 2010 4:35 PM
Programming
28
For assistance, please visit http://www.panasonic.com/help
*8 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*9 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at 700 ms unless pressing
{FLASH} fails to pick up the waiting call.
*10Generally, the line mode setting should not be changed. This setting
automatically maintains receiver volume at the proper level depending on the
current telephone line condition. Set the line mode to A if telephone line
condition is not good.
*11The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
TG6511(e).book Page 28 Wednesday, April 28, 2010 4:35 PM
Programming
29
For assistance, please visit http://www.panasonic.com/help
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L Set the date and time beforehand
(page 15).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm
option. i {SELECT}
3 Enter the desired month and date.
i {OK}
4 Set the desired time.
5 {AM/PM}: Select AM or PM. i
{OK}
6 {V}/{^}: Select the desired alarm
tone. i {SELECT}
L We recommend selecting a
different ringer tone from the one
used for outside calls.
7 {SELECT} i {OFF}
L When the alarm is set, E is
displayed.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Silent mode
Silent mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for
each handset.
Important:
L Set the date and time beforehand
(page 15).
L We recommend turning the base unit
ringer off (page 17) in addition to
turning the silent mode on.
(KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3)
L If you have set the alarm, the alarm
sounds even if the silent mode is
turned on.
Turning silent mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: Select On or Off. i
{SAVE}
L If you select Off, press {OFF}
to exit.
3 Enter the desired hour and minute
you wish to start this feature.
4 {AM/PM}: Select AM or PM. i
{OK}
5 Enter the desired hour and minute
you wish to end this feature.
6 {AM/PM}: Select AM or PM.
7 {SAVE} i {OFF}
L When the silent mode is set, & is
displayed.
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
Off Turns alarm off. Go to
step 7.
Once An alarm sounds once at
the set time.
Daily An alarm sounds daily at
the set time. Go to step
4.
TG6511(e).book Page 29 Wednesday, April 28, 2010 4:35 PM
Programming
30
For assistance, please visit http://www.panasonic.com/help
Changing the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Continue from step 3, “Turning
silent mode on/off”, page 29.
Changing the handset name
Each handset can be given a
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is Off. If
you select On without entering any
handset name, Handset 1 to
Handset 6 is displayed.
1 {MENU} i {#}{1}{0}{4}
2 Enter the desired name (max. 10
characters; see the character table,
page 20).
L If not required, go to step 3.
3 {SAVE}
4 {V}/{^}: Select the desired setting.
i {SELECT}
5 {SELECT} i {OFF}
Call block (Caller ID
subscribers only)
This feature allows the unit to reject calls
when:
the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 30).
the unit receives a call without phone
number (“Block calls without phone
number”, page 31).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list, the unit
sends out a busy tone to the caller, and
then disconnects the call.
Important:
L When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
phone number, the call is logged in the
caller list (page 34) with $ after the
call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call block list by using the caller list or
by entering the numbers directly.
Important:
L We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
From the caller list:
1 {<} CID
2 {V}/{^}: Select the entry to be
blocked.
L To edit the number, press
{EDIT} repeatedly until the
phone number is shown in the
10-digit format.
3 {SAVE}
4 {V}/{^}: Call block i
{SELECT}
5 {V}/{^}: Yes i {SELECT}
6 Edit the phone number if
necessary (24 digits max.).
7 {SAVE} i {OFF}
By entering phone numbers:
1 {MENU} i {#}{2}{1}{7} i
{ADD}
2 Enter the phone number (24
digits max.).
L To erase a digit, press
{CLEAR}.
3 {SAVE} i {OFF}
TG6511(e).book Page 30 Wednesday, April 28, 2010 4:35 PM
Programming
31
For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone
number including Out of area,
Private caller, or Long
distance.
1 {MENU} i {#}{2}{4}{0}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1 {MENU} i {#}{2}{1}{7}
2 {V}/{^}: Select the desired entry.
L To exit, press {OFF}.
3 To edit a number:
{EDIT} i Edit the phone number.
i {SAVE} i {OFF}
To erase a number:
{ERASE} i {V}/{^}: Yes i
{SELECT} i {OFF}
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, Block w/o num is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i {SAVE} i {OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 6 for information on the
available model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1 Handset:
{MENU} i {#}{1}{3}{0}
2 Base unit:
KX-TG6511 series: page 3
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3 Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
L While registering, Base in
registering is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
TG6511(e).book Page 31 Wednesday, April 28, 2010 4:35 PM
Programming
32
For assistance, please visit http://www.panasonic.com/help
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1 {MENU} i {#}{1}{3}{1}
L All handsets registered to the
base unit are displayed.
2 {V}/{^}: Select the handset you
want to cancel. i {SELECT}
3 {V}/{^}: Yes i {SELECT}
4 {OFF}
TG6511(e).book Page 32 Wednesday, April 28, 2010 4:35 PM
Caller ID Service
33
For assistance, please visit http://www.panasonic.com/help
Using Caller ID service
Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received,
the callers name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
Out of area: The caller dials
from an area which does not
provide a Caller ID service.
Private caller: The caller
requests not to send caller
information.
Long distance: The caller
makes a long distance call.
L If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
If a call is not answered, the unit treats it
as a missed call. The display shows
Missed call. This lets you know if
you should view the caller list to see who
called while you were away.
Note:
L Even when there are unviewed
missed calls,Missed call
disappears from the standby display if
the following operation is performed
by one of the registered handsets:
Being replaced on the base unit or
charger.
Pressing {OFF}.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Talking Caller ID
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
subscribe to a Caller ID service of
your service provider/telephone
company.
turn this feature on (page 26).
When caller information is received, the
handsets and base unit announce the
caller’s name or phone number received
from your service provider/telephone
company following every ring.
The unit announces in English only.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
L Caller ID service has a limit of how
many characters can be displayed. If
the caller’s name is too long, the
handset may not be able to display or
announce the entire name.
L The announcement is heard at the
same level as the ringer volume (page
17, 25).
L If you turn on the answering system
and set the number of rings 2
rings (page 41), the unit does not
announce the caller information. If
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
series (page 3)
TG6511(e).book Page 33 Wednesday, April 28, 2010 4:35 PM
Caller ID Service
34
For assistance, please visit http://www.panasonic.com/help
Toll saver is selected and there
is a new message, the unit does not
announce the caller information.
L When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services.
Phonebook name announcement
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Group ringer tone for
phonebook
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding
an entry to the phonebook, you can
assign it to the desired group (page 20).
When a call is received from a caller
assigned to a group, the ringer you
selected for that group rings after caller
information is displayed. If you select
Current ringer (default), the unit
uses the ringer tone you selected on
page 25 when calls from this group are
received.
1 {C} i {MENU}
2 {V}/{^}: Group i {SELECT}
3 {V}/{^}: Select the desired group.
i {SELECT}
4 {V}/{^}: Select the current setting of
the group ringer tone. i
{SELECT}
5 {V}/{^}: Select the desired ringer
tone. i {SAVE}
6 {OFF}
Caller list
Important:
L Only 1 person can access the caller
list at a time.
L Make sure the unit’s date and time
setting is correct (page 15).
Viewing the caller list and
calling back
1
{<} CID
2 Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {< }.
3 To call back, press {C}.
To exit, press {OFF}.
Note:
L If the entry has already been viewed
or answered, “Q” is displayed, even if
it was viewed or answered using
another handset.
Editing a callers phone
number before calling back
You can edit a phone number in the
caller list by removing its area code
and/or the long distance code “1”.
1 {<} CID
2 {V}/{^}: Select the desired entry.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {< }.
TG6511(e).book Page 34 Wednesday, April 28, 2010 4:35 PM
Caller ID Service
35
For assistance, please visit http://www.panasonic.com/help
3 Press {EDIT} repeatedly until the
phone number is shown in the
desired format.
4 {C}
Caller ID number auto edit
feature
Once you call back an edited number,
the handset which was used to call back
remembers the area code and format of
the edited number. The next time
someone calls from the same area code,
caller information is customized by the
handset as follows:
When the call is being received, the
Caller ID number is displayed in the
same format as the edited number.
After the call has ended, the caller’s
phone number is displayed in the
same format as the edited number,
when reviewed from the caller list.
For example, you can use this feature to
set the handset to ignore the area code
of callers in your area, so that you can
call these local numbers using caller
information without dialing the area
code.
To activate this feature, you must edit an
entry in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be set for each handset
(page 26). The default setting is On.
Note:
L Phone numbers from the 4 most
recently edited area codes are
automatically edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Erasing selected caller
information
1
{<} CID
2 {V}/{^}: Select the desired entry.
3 {ERASE} i {V}/{^}: Yes i
{SELECT} i {OFF}
Erasing all caller information
1
{<} CID
2 {ERASE} i {V}/{^}: Yes i
{SELECT} i {OFF}
Storing caller information to
the phonebook
1
{<} CID
2 {V}/{^}: Select the desired entry.
L To edit the number, press {EDIT}
repeatedly until the phone
number is shown in the desired
format.
3 {SAVE}
4 {V}/{^}: Phonebook i
{SELECT}
5 Continue from step 2, “Editing
entries”, page 21.
1 Local phone number
Example: 321-5555
2 Area code – Local phone number
Example: 555-321-5555
3 1 – Area code – Local phone
number
Example: 1-555-321-5555
TG6511(e).book Page 35 Wednesday, April 28, 2010 4:35 PM
Answering System
36
For assistance, please visit http://www.panasonic.com/help
Answering system
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages by selecting
Greeting only as the recording
time setting (page 41).
Important:
L Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
L When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been set correctly (page
15).
Memory capacity (including
your greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages
can be recorded.
Note:
L If message memory becomes full:
Messages full is shown on the
handset display.
The ANSWER ON indicator on the
base unit flashes rapidly when the
answering system is turned on.
L When the message memory becomes
full:
If you use the pre-recorded greeting
message, the unit automatically
switches to another pre-recorded
greeting message asking callers to
call again later.
If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
Turning the answering
system on/off
Press {ANSWER ON} to turn on/off the
answering system.
1 To turn on:
{MENU} i {#}{3}{2}{7}
To turn off:
{MENU} i {#}{3}{2}{8}
2 {OFF}
Note for base unit and handset:
L When the answering system is turned
on, the ANSWER ON indicator on the
base unit lights up.
Call screening
While a caller is leaving a message, you
can listen to the call through the unit
speaker.
To adjust the speaker volume, press {^}
or {V} repeatedly. You can answer the
call by pressing {C}. Call screening
can be set for each handset. The default
setting is On.
1 {MENU} i {#}{3}{1}{0}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Available for:
KX-TG6521/KX-TG6531/KX-TG6541
series (page 3)
Base unit
Handset
Handset
TG6511(e).book Page 36 Wednesday, April 28, 2010 4:35 PM
Answering System
37
For assistance, please visit http://www.panasonic.com/help
To adjust the speaker volume, press {^}
or {V} repeatedly. You can answer the
call by pressing {SP-PHONE}.
To turn off while screening a call, press
{V} repeatedly until the sounds goes off.
Note:
L If you adjust the speaker volume while
listening to messages or talking on the
intercom, the speaker volume for call
screening is turned on again.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
your own greeting message
a pre-recorded greeting message
Recording your greeting
message
1
{MENU} i {#}{3}{0}{2}
2 {V}/{^}: Yes i {SELECT}
3 After a beep sounds, hold the
handset about 20 cm (8 inches)
away and speak clearly into the
microphone (2 minutes max.).
4 Press {STOP} to stop recording.
5 {OFF}
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded
greeting messages:
If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers
to leave a message.
If the message recording time (page
41) is set to Greeting only,
callers’ messages are not recorded
and the unit plays a different pre-
recorded greeting message asking
callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1 {MENU} i {#}{3}{0}{4}
2 {YES} i {OFF}
Playing back the greeting
message
1
{MENU} i {#}{3}{0}{3}
2 {OFF}
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Base unit
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 37 Wednesday, April 28, 2010 4:35 PM
Answering System
38
For assistance, please visit http://www.panasonic.com/help
Operating the answering
system during playback
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
Erasing all messages
Press {ERASE} 2 times while the unit is
not in use.
Listening to messages
using the handset
When new messages have been
recorded:
New message is displayed.
The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 42).
1 To listen to new messages:
{PLAY}
or
{MENU} i {#}{3}{2}{3}
L If there are no new messages in
the answering system, {PLAY} is
not displayed.
To listen to all messages:
{MENU} i {#}{3}{2}{4}
2 When finished, press {OFF}.
Note:
L To switch to the receiver, press {C}.
Operating the answering
system
{MENU} i {V}/{^}: Answering
device i {SELECT}
Key Operation
{^} or {V} Adjust the speaker
volume
{7} Repeat message
*1
{8} Skip message
{}
(STOP)
Stop playback
{ERASE} Erase currently playing
message
Key Operation
{^} or {V} Adjust the
receiver/speaker
volume (during
playback)
{1} or {<} Repeat message
(during playback)
*1
{2} or {>} Skip message
(during playback)
{3} Enter the
Settings menu
{4} Play new messages
{5} Play all messages
{6} Play greeting
message
{7}{6} Record greeting
message
{8} Turn answering
system on
{PAUSE} Pause message
*2
{9} or
{STOP}
Stop recording
Stop playback
{0} Turn answering
system off
{*}{4}
*3
Erase currently
playing message
{*}{5} Erase all messages
{*}{6} Reset to a pre-
recorded greeting
message
TG6511(e).book Page 38 Wednesday, April 28, 2010 4:35 PM
Answering System
39
For assistance, please visit http://www.panasonic.com/help
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
*2 To resume playback:
{V}/{^}: Playback i {SELECT}
*3 You can also erase as follows:
{ERASE} i {V}/{^}: Yes i
{SELECT}
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1 Press {PAUSE} during playback.
2 {V}/{^}: Call back i
{SELECT}
Editing the number before calling
back
1 Press {PAUSE} during playback.
2 {V}/{^}: Edit & Call i
{SELECT}
3 Press {EDIT} repeatedly until the
phone number is shown in the
desired format (page 34). i {C}
Erasing all messages
1
{MENU} i {#}{3}{2}{5}
2 {V}/{^}: Yes i {SELECT} i
{OFF}
Voice memo
Recording a voice memo
You can use the base unit to leave a
voice memo (voice message) for
yourself or someone else (3 minutes
max.). Voice memos can be played back
later with the same operation used to
play back answering system messages.
1 {MEMO}
2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the microphone.
3 To stop recording, press {}
(STOP).
Remote operation
Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is 111.
Important:
L To prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
1 {MENU} i {#}{3}{0}{6}
2 Enter the desired 3-digit remote
access code.
3 {SAVE} i {OFF}
Deactivating remote operation
Press {* } in step 2 on “Remote access
code”, page 39.
L The entered remote access code is
deleted.
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 39 Wednesday, April 28, 2010 4:35 PM
Answering System
40
For assistance, please visit http://www.panasonic.com/help
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2 After the greeting message starts,
enter your remote access code.
L The unit announces the number of
new messages.
L The voice guidance
announcements are different
depending on the voice guidance
language setting (page 14).
3 Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 40).
4 When finished, hang up.
Note:
L You can also leave a message just as
any outside caller can. After the
greeting message starts, press {*} to
skip the greeting message and record
your message after the beep.
Voice guidance
When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations.
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
When the Spanish voice guidance is
selected
To start the voice guidance, press {9}.
The voice guidance announces the
available remote commands (page 40).
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1 Dial your phone number from a
touch-tone phone.
2 Let the phone ring 15 times.
L A long beep is heard.
Key Operation
{1} Repeat message
(during playback)
*1
{2} Skip message
(during playback)
{4} Play new messages
{5} Play all messages
{9} Stop playback
*2
Start voice guidance
*3
{0} Turn answering system
off
{*}{4} Erase currently playing
message
{*}{5} Erase all messages
{*}{#} End remote operation
(or hang up)
TG6511(e).book Page 40 Wednesday, April 28, 2010 4:35 PM
Answering System
41
For assistance, please visit http://www.panasonic.com/help
3 Enter your remote access code
within 10 seconds after the long
beep.
L The greeting message is played
back.
L You can either hang up, or enter
your remote access code again
and begin remote operation (page
39).
Answering system
settings
Number of rings before the
unit answers a call
You can change the number of times the
phone rings Ring count before the
unit answers calls. You can select 2 to 7
rings, or Toll saver.
The default setting is 4 rings.
Toll saver: The unit’s answering
system answers at the end of the 2nd
ring when new messages have been
recorded, or at the end of the 5th ring
when there are no new messages. If you
call your phone from outside to listen to
new messages (page 39), you know that
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1 {MENU} i {#}{2}{1}{1}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
For voice mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, call
waiting, voice mail, and unlimited
local/regional/long distance calls, please
note the following:
L To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
answering system (page 36).
L To use this unit’s answering system
rather than the voice mail service
provided by your service provider/
telephone company, please contact
your service provider/telephone
company to deactivate your voice mail
service.
If your service provider/telephone
company cannot do this:
Set this unit’s Ring count
setting so that this unit’s answering
system answers calls before the
voice mail service of your service
provider/telephone company does.
It is necessary to check the number
of rings required to activate the
voice mail service provided by your
service provider/telephone
company before changing this
setting.
Change the number of rings of the
voice mail service so that the
answering system can answer the
call first. To do so, contact your
service provider/telephone
company.
Callers recording time
You can change the maximum message
recording time allowed for each caller.
The default setting is 3 min.
1 {MENU} i {#}{3}{0}{5}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Selecting “Greeting only”
You can select Greeting only
which sets the unit to announce a
greeting message to callers but not
record messages.
TG6511(e).book Page 41 Wednesday, April 28, 2010 4:35 PM
Answering System
42
For assistance, please visit http://www.panasonic.com/help
Select Greeting only in step 2 on
“Caller’s recording time”, page 41.
Note:
L When you select Greeting only:
If you do not record your own
message, the unit will play the pre-
recorded greeting-only message
asking callers to call again later.
If you use your own message,
record the greeting-only message
asking callers to call again later
(page 37).
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is On.
Important:
L If you stored the voice mail access
number (page 43), the message
indicator also flashes for newly
recorded voice mail messages (page
44).
1 {MENU} i {#}{3}{4}{0}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Note:
L While message alert is on, battery
operating time is shortened (page 11).
TG6511(e).book Page 42 Wednesday, April 28, 2010 4:35 PM
Voice Mail Service
43
For assistance, please visit http://www.panasonic.com/help
Voice mail service
Voice mail is an automatic answering
service offered by your service
provider/telephone company. After you
subscribe to this service, your service
provider/telephone company’s voice
mail system answers calls for you when
you are unavailable to answer the phone
or when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
telephone company for details of this
service.
Important:
L To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
answering system (page 36). For
details, see page 41.
(KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3)
L You need to store the voice mail
access number to activate the
message alert feature (page 42) for
voice mail service.
Storing the voice mail (VM)
access number
In order to listen to your voice mail
messages, you must dial your service
provider/telephone company’s voice
mail access number. Once you have
stored your voice mail access number,
you can dial it automatically (page 44).
1 {MENU} i {#}{3}{3}{1}
2 Enter your access number (24 digits
max.). i {SAVE} i {OFF}
Note:
L When storing your voice mail access
number and your mailbox password,
press {PAUSE} to add pauses (page
16) between the access number and
the password as necessary. Contact
your service provider/telephone
company for the required pause time.
Example:
To erase the voice mail access
number
1 {MENU} i {#}{3}{3}{1}
2 Press and hold {CLEAR} until all
digits are erased. i {SAVE} i
{OFF}
Voice mail (VM) tone detection
Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones” or
“stutter tones”) to the unit to let you know
you have new voice mail messages. If
you hear a series of dial tones followed
by a continuous dial tone after you press
{C}, you have new voice mail
messages. Soon after you hang up a call
or after the phone stops ringing, your unit
checks the phone line to see if new voice
mail messages have been recorded.
Turn this feature off when:
You do not subscribe to voice mail
service.
Your service provider/telephone
company does not send voice mail
tones.
Your phone is connected to a PBX.
If you are not sure which setting is
required, contact your service
provider/telephone company.
1-222-333-4444
VM access
number
Pauses Password
PPPP 8888
TG6511(e).book Page 43 Wednesday, April 28, 2010 4:35 PM
Voice Mail Service
44
For assistance, please visit http://www.panasonic.com/help
Turning VM tone detection on/off
The default setting is On.
1 {MENU} i {#}{3}{3}{2}
2 {V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
New Voice Mail is displayed on
the handset if message indication
service is available.
The message indicator on the handset
flashes slowly if the message alert
feature is turned on (“Message alert”,
page 42).
1 {VM}
or
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
L If there are no new messages in
the voice mail, {VM} is not
displayed.
2 Follow the pre-recorded
instructions.
3 When finished, press {OFF}.
Note:
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {#} until
the handset beeps.
L If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
TG6511(e).book Page 44 Wednesday, April 28, 2010 4:35 PM
Intercom/Locator
45
For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
between handsets
between the handset and base unit
(KX-TG6541 series: page 3)
Note:
L If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press { OFF}, then press {C}.
To answer the call with the base
unit, press {SP-PHONE} 2 times.
(KX-TG6541 series: page 3)
L When paging unit(s), the paged unit(s)
beeps for 1 minute.
Making an intercom call
1
{MENU} i {INT}
2 {V}/{^}: Select the desired unit. i
{SELECT}
L To stop paging, press {OFF}.
3 When you finish talking, press
{OFF}.
1 Press {INTERCOM}.
When 2 or more handsets are
registered:
To page a specific handset, enter
the handset number.
To page all handsets, press {0} or
wait for a few seconds.
L To stop paging, press
{INTERCOM}.
2 When you finish talking, press
{INTERCOM}.
Answering an intercom call
1
Press {C} to answer the page.
2 When you finish talking, press
{OFF}.
1 Press {INTERCOM} to answer the
page.
2 When you finish talking, press
{INTERCOM}.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit:
{LOCATOR}
L All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
KX-TG6511/KX-TG6521/
KX-TG6531 series: page 3
Press {OFF}.
KX-TG6541 series: page 3
Press {C}, then press {OFF}.
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 45 Wednesday, April 28, 2010 4:35 PM
Intercom/Locator
46
For assistance, please visit http://www.panasonic.com/help
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
between 2 handsets
between the handset and base unit
(KX-TG6541 series: page 3)
1 During an outside call, press {INT}
to put the call on hold.
2 {V}/{^}: Select the desired unit. i
{SELECT}
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
4 To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the destination unit.
To establish a conference call:
Press {CONF}.
L To leave the conference, press
{OFF}. The other 2 parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
1 During an outside call, press
{INTERCOM}.
When 2 or more handsets are
registered:
To page a specific handset, enter
the handset number.
To page all handsets, press {0} or
wait for a few seconds.
2 Wait for the paged party to answer.
L If paged party does not answer,
press {INTERCOM} to return to
the outside call.
3 To complete the transfer:
Press {SP-PHONE}.
L The outside call is being routed to
the handset.
To establish a conference call:
Press {CONF}.
L To leave the conference, press
{SP-PHONE}. The other 2 parties
can continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
Answering a transferred call
Press {C} to answer the page.
Press {SP-PHONE} to answer the
page.
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
Handset
Base unit
Available for:
KX-TG6541 series (page 3)
TG6511(e).book Page 46 Wednesday, April 28, 2010 4:35 PM
Useful Information
47
For assistance, please visit http://www.panasonic.com/help
Wall mounting
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand
position).
Note:
L Make sure that the wall is strong
enough to support the weight of the
unit.
Base unit
1
Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
L The bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2 Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
3 Mount the unit on a wall then slide
down to secure in place.
To stand on a desk
Turn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard.
Charger
Drive the screws (not supplied) into the
wall.
Bottom
A
B
Hook
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
Wall phone plate
102 mm
(4 inches)
(120 V AC, 60 Hz)
1
2
1
2
Bottom
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
TG6511(e).book Page 47 Wednesday, April 28, 2010 4:35 PM
Useful Information
48
For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
Display message Cause/solution
Base no power
or
No link. Re-connect
base AC adaptor.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 31).
Busy L The called unit is in use.
L Other units are in use and the system is busy.
Try again later.
L The handset you are using is too far from the
base unit. Move closer and try again.
Call phone company for
your access #
L You have not stored the voice mail access
number. Store the number (page 43).
Check tel line L The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 10).
Error!! L Recording was too short. Try again.
*1
Invalid L There is no handset registered to the base
unit matching the handset number you
entered.
L The handset is not registered to the base unit.
Register the handset (page 31).
Requires subscription
to Caller ID.
L You must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.
Use rechargeable
battery.
L A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
5, 8.
TG6511(e).book Page 48 Wednesday, April 28, 2010 4:35 PM
Useful Information
49
For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the
batteries from the handset, and then insert the batteries into the handset again.
General use
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
Programmable settings
Problem Cause/solution
The handset does not turn
on even after installing
charged batteries.
L Place the handset on the base unit or charger to
turn on the handset.
The unit does not work. L Make sure the batteries are installed correctly
(page 10).
L Fully charge the batteries (page 10).
L Check the connections (page 10).
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset has not been registered to the base
unit. Register the handset (page 31).
I cannot hear a dial tone. L The base unit’s AC adaptor or telephone line cord
is not connected. Check the connections.
L Disconnect the base unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to have the
unit repaired. If the working telephone does not
operate properly, contact your service provider/
telephone company.
The indicator on the
handset flashes slowly.
L New messages have been recorded. Listen to the
new messages (page 38).
*1
L New voice mail messages have been recorded.
Listen to the new voice mail messages (page 44).
Problem Cause/solution
The display is in a
language I cannot read.
L Change the display language (page 14).
I cannot register a handset
to a base unit.
L The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page 32).
TG6511(e).book Page 49 Wednesday, April 28, 2010 4:35 PM
Useful Information
50
For assistance, please visit http://www.panasonic.com/help
Battery recharge
Making/answering calls, intercom
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
Problem Cause/solution
The handset beeps and/or
) flashes.
L Battery charge is low. Fully charge the batteries
(page 10).
I fully charged the
batteries, but
) still flashes,
0 is displayed, or
the operating time
seems to be shorter.
L Clean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
L It is time to replace the batteries (page 10).
Problem Cause/solution
_ is displayed. L The handset is too far from the base unit. Move
closer.
L The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base
unit.
L The handset is not registered to the base unit.
Register it (page 31).
Noise is heard, sound cuts
in and out.
L You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
The handset does not ring. L The ringer volume is turned off. Adjust the ringer
volume (page 25).
L Silent mode is turned on. Turn it off (page 29).
The base unit does not
ring.
*1
L The ringer volume is turned off. Adjust the ringer
volume (page 17).
I cannot make a call. L The dialing mode may be set incorrectly. Change
the setting (page 15).
L The handset is too far from the base unit. Move
closer and try again.
I cannot make long
distance calls.
L Make sure that you have long distance service.
TG6511(e).book Page 50 Wednesday, April 28, 2010 4:35 PM
Useful Information
51
For assistance, please visit http://www.panasonic.com/help
Caller ID/Talking Caller ID
*1
Problem Cause/solution
Caller information is not
displayed.
L You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
L If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
Caller information is not
announced.
*1
L The handset or base unit’s ringer volume is turned
off. Adjust it (page 17, 25).
L The Talking Caller ID feature is turned off. Turn it
on (page 26).
L The number of rings for the answering system is
set to 2 rings or Toll saver. Select a
different setting (page 41).
L If the base unit and another handset are having an
intercom call, your handset does not announce
caller information.
*2
Caller information is
displayed or announced
*1
late.
L Depending on your service provider/telephone
company, the unit may display or announce the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
The caller list/incoming
phone numbers are not
edited automatically.
L The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 26).
L You need to call back the edited number to
activate Caller ID number auto edit.
I cannot dial the phone
number edited in the caller
list.
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 34).
TG6511(e).book Page 51 Wednesday, April 28, 2010 4:35 PM
Useful Information
52
For assistance, please visit http://www.panasonic.com/help
*1 KX-TG6521/KX-TG6531/KX-TG6541 series: page 3
*2 KX-TG6541 series: page 3
Answering system (KX-TG6521/KX-TG6531/KX-TG6541 series: page 3)
Time on the unit has
shifted.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
Manual (off) (page 25).
The 2nd caller’s
information is not
displayed during an
outside call.
L In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
Problem Cause/solution
The unit does not record
new messages.
L The answering system is turned off. Turn it on
(page 36).
L The message memory is full. Erase unnecessary
messages (page 38).
L The recording time is set to Greeting only.
Change the setting (page 41).
L If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 41).
I cannot operate the
answering system.
L Someone is using the unit. Wait for the other user
to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.
Problem Cause/solution
TG6511(e).book Page 52 Wednesday, April 28, 2010 4:35 PM
Useful Information
53
For assistance, please visit http://www.panasonic.com/help
Liquid damage
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
I cannot operate the
answering system
remotely.
L The remote access code is not set. Set the remote
access code (page 39).
L You are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 39).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 40).
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Problem Cause/solution
TG6511(e).book Page 53 Wednesday, April 28, 2010 4:35 PM
Useful Information
54
For assistance, please visit http://www.panasonic.com/help
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
L Ringer Equivalence No. (REN).......0.1B
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
TG6511(e).book Page 54 Wednesday, April 28, 2010 4:35 PM
Useful Information
55
For assistance, please visit http://www.panasonic.com/help
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce, or eliminate,
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
Notice
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
TG6511(e).book Page 55 Wednesday, April 28, 2010 4:35 PM
Guía Rápida Española
56
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
Guía Rápida Española
Instalación
Correcto Incorrecto
CARGUE
APROXIMADAMENTE
DURANTE 7 HORAS
Auricular
Cargador
Unidad base
L
Use solo el adaptador de corriente Panasonic PQLV219 incluido.
(120 V CA, 60 Hz)
A la toma de
teléfono de línea
única (RJ11C)
L
Use solo el adaptador de
corriente Panasonic
PQLV219 incluido.
L
UTILICE SOLO baterías de Ni-MH tamaño AAA
(R03).
L
NO utilice baterías Alcalinas, de Manganeso o de
Ni-Cd.
L
Compruebe que las polaridades son las correctas
(S, T).
(120 V CA, 60 Hz)
Confirme que
aparezca
Cargando.
SOLO baterías Ni-MH recargables
Oprima firmemente
el contacto.
“Clic”
“Clic”
*Requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Filtro DSL/ADSL*
Gancho
TG6511(e).book Page 56 Wednesday, April 28, 2010 4:35 PM
Guía Rápida Española
57
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
Sugerencias de operación
Teclas de función
El auricular incluye 3 teclas de función. Al oprimir una tecla
de función, puede seleccionar la función que aparece
directamente encima de ella en la pantalla.
{
C
}
,
{
MENU
}
,
{
REMR.
}
y otras funciones adicionales se
asignan a las teclas de función. Preste atención a la
pantalla para ver qué funciones están asignadas a las
teclas de función durante la operación del auricular.
Tecla navegadora
{^}
,
{V}
,
{
<
}
, o
{
>
}
: Navegue por diversas listas y
elementos.
?
VOL. (Volumen:
{^}
o
{V}
): Ajuste el volumen del
receptor o el altavoz mientras habla.
{
<
}
CID (identificador de llamadas): Vea la lista de
personas que llamaron.
{
>
}
REDIAL (remarcación): Vea la lista de remarcación.
Cambio de idiomas (Auricular) (predeterminado: inglés)
Idioma de la pantalla
{
MENU
}
i
{
#
}{
1
}{
1
}{
0
}
i
{V}
/
{^}
:
Español
i
{
GUARDA
}
i
{
OFF
}
Idioma de la guía de voz
Disponible para las series KX-TG6521/KX-TG6531/KX-TG6541
{
MENU
}
i
{
#
}{
1
}{
1
}{
2
}
i
{V}
/
{^}
:
Español
i
{
GUARDA
}
i
{
OFF
}
Fecha y hora (Auricular)
1
{
MENU
}
i
{
#
}{
1
}{
0
}{
1
}
2
Introduzca el día, mes y año actuales.
i
{
OK
}
3
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
4
{
GUARDA
}
i
{
OFF
}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas Marque el número telefónico.
i
{C}
/
{s}
Para contestar llamadas
{C}
/
{s}
Para colgar
{
OFF
}
Para ajustar el volumen del
receptor o del altavoz
Oprima
{^}
o
{V}
repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de
remarcación
{
REMR.
}
o
{
>
}
REDIAL
i
{V}
/
{^}
: Seleccione el número
telefónico deseado.
i
{C}
{V}
{^}
{<}{>}
Subir volumen
Bajar volumen
-
-
-
-
TG6511(e).book Page 57 Wednesday, April 28, 2010 4:35 PM
Guía Rápida Española
58
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
Cómo hacer y contestar llamadas (Auricular)
Para ajustar el volumen del
timbre del auricular
1
{
MENU
}
i
{
#
}{
1
}{
6
}{
0
}
2
{V}
/
{^}
: Seleccione el volumen deseado.
i
{
GUARDA
}
i
{
OFF
}
Cómo hacer y contestar llamadas (Unidad base): serie KX-TG6541
Para hacer llamadas
{
SP-PHONE
}
i
Marque el número telefónico.
Para contestar llamadas
{
SP-PHONE
}
Para colgar
{
SP-PHONE
}
Para ajustar el volumen del
altavoz
Oprima
{^}
o
{V}
repetidamente mientras habla.
Remarcación del último
número marcado
{
SP-PHONE
}
i
{
REDIAL
}
Para ajustar el volumen del
timbre de la unidad base
Oprima
{^}
o
{V}
repetidamente para seleccionar el volumen
deseado.
Directorio telefónico compartido (Auricular)
Para añadir entradas
1
{
C
}
i
{
AÑAD.
}
2
Introduzca el nombre de la persona (máx. 16 caracteres).
i
{
OK
}
3
Introduzca el número telefónico de la persona (máx. 24
dígitos).
i
{
OK
}
4
{V}
/
{^}
: Seleccione el grupo deseado.
i
{
SELEC.
}
2 veces
i
{
OFF
}
Para hacer llamadas
{
C
}
i
{V}
/
{^}
: Seleccione la entrada deseada.
i
{C}
Sistema contestador de llamadas (Unidad base): series KX-TG6521/KX-TG6531/
KX-TG6541
Contestador encendido/
apagado
Oprima
{
ANSWER ON
}
para encender y apagar el contestador
de llamadas.
Para escuchar mensajes
{
6
}
Sistema contestador de llamadas (Auricular): series KX-TG6521/KX-TG6531/KX-TG6541
Para escuchar mensajes
Para escuchar mensajes nuevos:
{
REPRO.
}
o
{
MENU
}
i
{
#
}{
3
}{
2
}{
3
}
Para escuchar todos los mensajes:
{
MENU
}
i
{
#
}{
3
}{
2
}{
4
}
Preguntas frecuentes
Pregunta Causa y solución
¿Por qué aparece
_
?
L
El auricular está demasiado lejos de la unidad base.
Acérquelo.
Operaciones básicas
TG6511(e).book Page 58 Wednesday, April 28, 2010 4:35 PM
Guía Rápida Española
59
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
¿Por qué aparece
_
?
L
El adaptador para corriente de la unidad base no está
conectado correctamente. Conecte de nuevo el adaptador
para corriente a la unidad base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
Auricular:
{
MENU
}
i
{
#
}{
1
}{
3
}{
0
}
2
Unidad base:
N
Serie KX-TG6511
Oprima y mantenga oprimido
{
LOCATOR
}
durante
aproximadamente 5 segundos. (No hay tono de registro)
N
Series KX-TG6521/KX-TG6531/KX-TG6541
Oprima y mantenga oprimido
{
LOCATOR
}
durante
aproximadamente 5 segundos hasta que suene el tono de
registro.
3
Auricular:
Oprima
{
OK
}
, y después espere a que se
emita un pitido largo.
¿Cómo se incrementa el
nivel de volumen del
auricular?
L
Oprima la tecla de navegación
{^}
repetidamente mientras
habla.
¿Por qué hay ruido o se
corta la conversación?
L
Trate de reubicar la unidad base de forma que se minimice la
distancia al auricular.
L
Si ocurre el mismo problema aunque el auricular se
encuentre enseguida de la unidad base, llame a soporte al
cliente de Panasonic al 1-800-211-PANA (1-800-211-7262).
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se
venden con su unidad base) a una sola unidad base.
L
Para adquirir auriculares accesorios adicionales
(KX-TGA401/KX-TGA651/KX-TGA750), visite
http://www.panasonic.com
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-
605-1277.
¿Es posible mantener
cargando las baterías todo el
tiempo?
L
Puede dejar el auricular en la unidad base o el cargador en
cualquier momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera
(segunda llamada)?
L
Oprima
{
CALL WAIT
}
cuando escuche el tono de llamada en
espera.
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset
(solo en inglés)
Preguntas frecuentes
Pregunta Causa y solución
TG6511(e).book Page 59 Wednesday, April 28, 2010 4:35 PM
Appendix
60
For assistance, please visit http://www.panasonic.com/help
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
Accessory Purchases (United States and Puerto Rico)
TG6511(e).book Page 60 Wednesday, April 28, 2010 4:35 PM
Appendix
61
For assistance, please visit http://www.panasonic.com/help
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“Limited Warranty period”), at its
option either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product. The decision to repair or
replace will be made by the warrantor.
Parts Labor
One (1) Year One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor.
During the “Parts” Limited Warranty period, there will be no charge for parts.
You must mail-in your product prepaid during the Limited Warranty period. This
Limited Warranty excludes both parts and labor for batteries, antennas, and
cosmetic parts (cabinet). This Limited Warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This Limited
Warranty is extended only to the original purchaser and only covers products
purchased as new.
For assistance in the continental United States and Puerto Rico in obtaining
repairs please ship the product prepaid to:
PSTC (Panasonic) Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a
return address and provide a day time phone number where you can be
reached. P.O. Boxes are not acceptable. Keep the tracking number for your
records. A copy of valid registered receipt is required under the 1 year parts
and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
Panasonic Telephone Products
Limited Warranty
Ship-In Service
TG6511(e).book Page 61 Wednesday, April 28, 2010 4:35 PM
Appendix
62
For assistance, please visit http://www.panasonic.com/help
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The Limited Warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by
the warrantor, or failures which result from accidents, misuse, abuse, neglect,
bug infestation, mishandling, misapplication, alteration, faulty installation, set-
up adjustments, misadjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, introduction of sand, humidity
or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY. (As examples, this excludes damages for lost
time, lost calls or messages, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the Limited Warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your satisfaction, then
write to the warrantor’s Consumer Affairs Department at the addresses listed
for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and
adequately insured.
L Do not send your unit to Panasonic Corporation of North America
listed on the back cover or to executive or regional sales offices. These
locations do not repair consumer products.
When you ship the product
TG6511(e).book Page 62 Wednesday, April 28, 2010 4:35 PM
Index
63
Index
# 4-way conference: 19
A Additional handset: 31
Alarm: 29
Answering calls: 17
Answering system
Call screening: 36
Erasing messages: 38, 39, 40
Greeting message: 37
Greeting only: 41
Listening to messages: 37, 38, 40
MEMO: 39
Number of rings: 41
Recording time: 41
Remote access code: 39
Remote operation: 39
Ring count: 41
Toll saver: 41
Turning on/off: 36, 38, 40
Auto talk: 17
B Battery: 10, 11
Belt clip: 14
Booster (Clarity booster): 19
C Call block: 30
Caller ID number auto edit: 35
Caller ID service: 33
Caller list: 34
Caller list edit: 34
Call share: 19
Call waiting: 19
Call Waiting Caller ID: 19
Chain dial: 22
CID (Caller ID): 34
Conference calls: 46
Control type: 12
Customer support: 26
D Date and time: 15
Dialing mode: 15
Direct commands: 25
Display
Contrast: 26
Language: 14
E Eco mode: 11
Error messages: 48
F Flash: 18, 26
G Groups: 20, 34
H Handset
Deregistration: 32
Locator: 45
Name: 30
Registration: 31
Hold: 18
I Intercom: 45
K Key tone: 26
L Line mode: 26
M Making calls: 16
Missed calls: 33
Mute: 18
P Pause: 16
Phonebook: 20
Power failure: 11
Privacy mode: 19
R Redialing: 16
Ringer tone: 25, 34
Rotary/pulse service: 19
S Silent mode: 29
SP-PHONE (Speakerphone): 16
T Talking caller ID: 33
Temporary tone dialing: 19
Time adjustment: 25
Transferring calls: 46
Troubleshooting: 49
TTY: 60
V VM (Voice mail): 43
Voice guidance language: 14
Voice mail: 41, 43
Volume
Receiver: 16
Ringer (Base unit): 17
Ringer (Handset): 17, 25
Speaker: 16
W Wall mounting: 47
TG6511(e).book Page 63 Wednesday, April 28, 2010 4:35 PM
PNQX2397XA CM1209DW3050
For your future reference
We recommend keeping a record of the following information to assist with any repair
under warranty.
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is
prohibited without the written consent of Panasonic System Networks Co., Ltd.
© Panasonic System Networks Co., Ltd. 2009
Serial No. Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
If your product is not working properly. . .
IMPORTANT!
Visit our Web site: http://www.panasonic.com/help
L
FAQ and troubleshooting hints are available.
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
Printed in Malaysia
TG6511(e).book Page 64 Wednesday, April 28, 2010 4:35 PM
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG6541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG6541 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info