588432
26
Zoom out
Zoom in
Previous page
1/56
Next page
Call block (Caller ID subscribers only)
T
his feature allows the unit to reject calls when:
the unit receives a call from a phone number
stored in the call block list as unwanted (“Storing
unwanted callers”, page 26).
the unit receives a call without phone number
(“Blocking incoming calls without phone
number”, page 26).
When a call is received, the unit rings for a short
time while the caller is being identified. If the
phone number matches an entry in the call block
list, the unit sends out a busy tone to the caller,
and then disconnects the call.
Important:
R When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the call is
logged in the caller list (page 29) with
after
t
he call is disconnected.
Storing unwanted callers
Y
ou can store up to 30 phone numbers in the call
block list.
Important:
R We recommend storing 10 digits (including an
area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.
Handset
n F
rom the caller list:
1 MFN CID
2 MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MSAVEN
4 MbN: Call block a MSELECTN
5 MbN: Yes a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1 MMENUN#217 a MADDN
2 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
3 MS
AVEN a MOFFN
Blocking incoming calls without phone number
Y
ou can reject a call when no phone number is
provided, such as a call just showing Out of
area.
Handset
1 MM
ENUN#240
2 MbN: Select the desired setting. a MSAVEN
a MOFFN
Viewing/editing/erasing call block numbers
Handset
1 MM
ENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: Yes a MSELECTN a
MOFFN
Note:
R When editing, press the desired dial key to add,
MCLEARN to erase.
R When viewing, Block w/o num is displayed
if the blocking incoming calls without phone
number feature is turned on. To turn the feature
off: MERASEN a MCN a MSAVEN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
R See page 4 for information on the available
model.
26
For assistance, please visit http://www.panasonic.com/help
Programming
TG477x(en-en)_1130_ver021.pdf 26 2011/11/30 15:57:55
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG4773 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG4773 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info