588780

Panasonic KX-TG4133 Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
Programming
24
For assistance, please visit http://www.panasonic.com/help
4 {r}: Select the desired setting. s
{SELECT} 2 times
5 {OFF}
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”, page
24).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 24).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
L When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 27) with
$ after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
L We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
■ From the caller list:
1 {<} CID
2 {r}: Select the entry to be blocked.
L To edit the number, press {EDIT}
repeatedly until the phone number
is shown in the 10-digit format.
3 {SAVE}
4 {r}: “Call block” s {SELECT}
5 {r}: “Yes” s {SELECT}
6 Edit the phone number if necessary
(24 digits max.).
7 {SAVE} s {OFF}
■ By entering phone numbers:
1 {MENU}(217 s {ADD}
2 Enter the phone number (24 digits
max.).
L To erase a digit, press {CLEAR}.
3 {SAVE} s {OFF}
Blocking incoming calls without
phone number
You can reject a call when no phone number is
provided, such as a call just showing “Out of
area”.
1 {MENU}(24)
2 {r}: Select the desired setting. s
{SAVE} s {OFF}
Viewing/editing/erasing call block
numbers
1 {MENU}(217
2 {r}: Select the desired entry.
L To exit, press {OFF}.
3 To edit a number:
{EDIT} s Edit the phone number. s
{SAVE} s {OFF}
To erase a number:
{ERASE} s {r}: “Yes” s {SELECT}
s {OFF}
Note:
L When editing, press the desired dial key to
add, {CLEAR} to erase.
L When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: {ERASE} s {V} s
{SAVE} s {OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
TG413x(e).book Page 24 Tuesday, December 7, 2010 8:01 AM
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG4133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG4133 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info