Main menu Sub-menu 1 Sub-menu 2
Base Unit Setup
*2
First Ring
*8
<On>
– –
Dial Mode
<Tone>
– 13
Recall/Flash
*9,
*10
<600 msec.>
– 15
Privacy Mode
*1,
*11
<Off>
– –
Base Unit PIN
– 31
Repeater Mode
<Off>
– 21
Country
<Other>
– 20
*1 KX-TG2712
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG2712)
*3 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*4 The preset melodies in this product are used with permission of © 2011 Copyrights Vision
Inc.
*5 The default display language will be as follows if you select the following regional codes
when changing the unit’s region setting (page 12):
“Other” = “English”
“Česká republika” = “Čeština”
“Slovensko” = “Slovenčina”
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*8 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*10 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 20):
“Česká republika” = “100 msec.”
“Slovensko” = “100 msec.”
*11 To prevent other users from joining your conversations with outside callers, turn this feature
on.
19
Programming
