2 MbN: “Handset Setup” a M N
3 MbN: “Set Date & Time” a M N
4 Enter the current date, month, and year.
Example: 15 July, 2012
15 07 12
5 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
6 M
N a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 M
N
2 MbN: “Base Unit Setup” a M
N
3 MbN: “Dial Mode” a M N
4 MbN: Select the desired setting. a
M
N a M N
One touch eco mode
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and “ECO” is
shown on the handset display.
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
“ECO” goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
(KX-TG2712)
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
21), one touch eco mode is cancelled.
13
Getting Started
