588433

Panasonic KX-TG243SK Manual

38
Zoom out
Zoom in
Previous page
1/56
Next page
Intercom
I
ntercom calls can be made:
– between the base unit and a handset
– between handsets
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, you hear 2 tones.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
MSP-PHONEN 2 times.
– To answer the call with the handset, press
MOFFN, then press M
N.
Making an intercom call
Base unit
1 P
ress MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
R To stop paging, press MINTERCOMN.
2 When you finish talking, press MINTERCOMN
or place the corded handset on the cradle.
Handset
1 MM
ENUN a MINTN
2 MbN: Select the desired unit. a MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press MOFFN.
Answering an intercom call
Base unit
1 L
ift the corded handset or press MINTERCOMN
to answer the page.
2 When you finish talking, place the corded
handset on the cradle or press MINTERCOMN.
Handset
1 P
ress M
N
to answer the page.
2 When you finish talking, press MOFFN.
Handset locator
Y
ou can locate a misplaced handset by paging it.
1 Base unit: Press MLOCATORN.
R All registered handsets beep for 1 minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N,
then press MOFFN.
Transferring calls,
c
onference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between the base unit and a handset
– between 2 handsets
Base unit
1 D
uring an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside call.
3 To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference, press
MCONFN.
Handset
1 D
uring an outside call, press MINTN to put the
call on hold.
2 MbN: Select the desired unit. a MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not answer, press
M
N
to return to the outside call.
38
For assistance, please visit http://www.panasonic.com/help
Intercom/Locator
TG477x(en-en)_1130_ver021.pdf 38 2011/11/30 15:57:56
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG243SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG243SK in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info