645709
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
Answering System Feature (KX-TG1090/KX-TG1092/KX-TG1093/KX-TG1094 )
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Note:
Error tones (2 long beeps) will sound
if a wrong remote access code is
entered. You can enter the remote
access code again. If this fails again,
the phone will release the line.
Keys
5
4
6
Functions
Starts and stops message
playback
Repeats the current message
Skips forward a message
Deletes the current message
Using the answering system remotely
1 Use a touch tone phone and call your
phone number from outside.
2 Press [ ] after you hear the greeting,
the greeting will be stopped.
3 Enter the remote access code.
New messages start to be played back.
If there are no new messages, all
messages will be played back after a
long beep.
4 Refer to following table and press
keys for corresponding operation.
Note:
You can hang up at any time.
Remote commands
Remote accessing
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to the voice
messages.
Important:
In order to operate the answering
system remotely, you must first set a
remote code. This code must be
entered each time you operate the
answering system remotely.
Remote access code
A remote access code must be entered
when operating the answering system
remotely. This code prevents
unauthorised parties from listening to
your messages remotely. The factory
setting is "0000".
Changing remote access code
If you change the access code, please
write down your new access code as the
unit will not reveal the access code to you.
1 [
]
•"
" flashes on the display.
2 Press [ ] and enter the previous access
code then press [
/OK] to confirm.
If a wrong access code is entered, a
long beep will be heard.
3 Input a new access code (4 digits)
then press [
/OK] key.
4 Input this new access code once
again for confirmation. >[
/OK]
If a wrong access code is entered, a
long beep will be heard.
5 [ ]
Turning call screening on / off
(handset number 1 only)
1 [
]
•"
" flashes on the display.
2 [3 SCREEN]
3 Press [ ] or [ ] to select between
“On” and “OFF”.
4 [ /OK] to save the setting. >[ ]
Screening calls (handset number 1 only)
While a caller is leaving a message, you can
listen to the call through the handset
speaker. To adjust the speaker volume,
press [ ] or [ ] repeatedly. You can answer
the call by pressing [
] on the handset.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TG1093 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TG1093 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic KX-TG1093

Panasonic KX-TG1093 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info