463423

Panasonic KX-TCD150FXC Manual

32
Zoom out
Zoom in
Previous page
1/77
Next page
Items Adjustment
Point
Procedure Check or
Replace Parts
(F)* Battery Monitor
Confirmation &
Adjustment (Important)
- 1. Apply 2.3V ± 0.005V between TP3(+) and TP4(-) with DC power.
2. Execute the command “deactmac” to stabilize the value.
3. Then,execute the command “readbatt”.The returned value is XX.
4. Confirm that XX is between 98 and A8.
98 < XX < A8(Hex)
(If XX is out of range,change BBIC)
IC1,D4,L4,
L5,Q2,Q3,
R6,D2,R22,
C26,F1,R21,
R4,C33
(G) Battery low Confirmation
(Important)
- 1. Apply 2.40V between TP3(+) and TP4(-).
2. Confirm that there is no Speaker sound (Battery low alarm).
3. Apply 2.20V between TP3(+) and TP4(-).
4. Confirm that there is Speaker sound (Battery low alarm).
IC1,F1,R21,
R4,C33,
C12,C31,R17,
R20,C10,
C11,D6,D7
(H)* BBIC Clock Adjustment
(Important)
TP19 1. Apply 2.6V between TP 3(+) and TP 4(-) with DC power.
2. Execute the command “deactmac”.
3. Execute the command “conttx”.
4. Input Command “rdeeprom 00 01 01",then you can confirm the current value.
5. Adjust the frequency of TP19 executing the command “setfreq 00 xx (where xx
is the value)”.
so that the reading of the frequency counter is 10.368000MHz ± 10Hz.
IC1,L3,C57,
IC3,X1,C16,
C17
(I)* Transmitted Power
Confirmation
TP15 Remove the Antenna before starting steps from 1 to 5. Replace C58 with
RESISTOR (0Ω). Be sure to mount C58 back to the same place after checking.
1. Configure the DECT tester(CMD60) as follows;
<Setting>
·
Test mode: PP
·
RFPI: 0102030405
·
Traffic Channel: 5
·
Traffic Slot: 4
·
Mode: Loopback
2. Execute the command “testmode”.
3. Execute the command “regcmd60”
4. Initiate connection from DECT tester.
5. Confirm that the NTP value at A201 (TP15) is 20dBm ~ 25dBm
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
(J) Modulation Check and
Adjustment
TP15 Follow steps 1 to 4 of (I) above.
5. Confirm that the B-Field Modulation is 340kHz/div ~ 402kHz/div using data
type Fig31.
6. Adjust the B-Field Modulation if required. (Execute the command “Readmod”
and “Writemod xx”, where xx is the value.)
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
(K) Frequency Offset
Confirmation
- Follow steps 1 to 4 of (I) above.
5. Confirm that the frequency offset is -50kHz ~ +50kHz.
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
(L) Sensitivity Receiver
Confirmation
- Follow steps 1 to 4 of (I) above.
5. Set DECT tester power to -88dBm.
6. Confirm that the BER is < 1000ppm.
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
(M) Timing Confirmation - Follow steps 1 to 4 of (I) above.
5. Confirm that the Timing accuracy is < ± 2.0ppm.
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
(N)* RSSI Level
Confirmation
- Follow steps 1 to 4 of (I) above.
5. Set DECT tester power to -88dBm.
6. Execute the command “readrssi”
7. Confirm: 25 < returned value < 43 (hex) (0x34 ± F (hex))
IC1,IC3,C54,
C66,C60,
L3,C57,C55,
C56,C62,
R23,R24,C63,
C64,C65,
R18
32
KX-TCD150FXB / KX-TCD150FXC / KX-TCD152FXB / KX-TCA115EXB / KX-TCA115EXC
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TCD150FXC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TCD150FXC in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info