463423
25
Zoom out
Zoom in
Previous page
1/77
Next page
Items Adjustment
Point
Procedure Check or
Replace Parts
(K) Sensitivity Receiver
Confirmation
- Follow steps 1 to 3 of (H) above.
4. Set DECT tester power to -88dBm.
5. Confirm that the BER is < 1000ppm.
IC2,IC3,L1,
C43,C78,
C75,C69,C48,
C72,C66,
C67,C76,C57,
C73,L3,
DA1,R66,R67,
C55,C56,
R78,R79,C54,
C58,C86,
R38
(L) Timing Confirmation - Follow steps 1 to 3 of (H) above.
4. Confirm that the Timing accuracy is < ± 2.0ppm.
IC2,IC3,L1,
C43,C78,
C75,C69,C48,
C72,C66,
C67,C76,C57,
C73,L3,
DA1,R66,R67,
C55,C56,
R78,R79,C54,
C58,C86,
R38
(M)* RSSI Level
Confirmation
- Follow steps 1 to 3 of (H) above.
4. Set DECT tester power to -88dBm.
5. Execute the command “readrssi”.
6. Confirm: 25 < returned value < 43 (hex) (0x34 ± F (hex))
IC2,IC3,L1,
C43,C78,
C75,C69,C48,
C72,C66,
C67,C76,C57,
C73,L3,
DA1,R66,R67,
C55,C56,
R78,R79,C54,
C58,C86,
R38
(N)* Receive Audio Check
and Adjustment
ANT
J1
1. Configure the DECT tester (CMD60) as follows;
<Setting>
·
Test mode: FP
·
Mode: Normal
·
PMID: 00000
2. Execute the command “testmode”.
3. Initiate connection from DECT tester.
4. Execute the command “hookoff”.
5. Execute the command “openau”.
6. Connect J1 (Telephone Socket) to Tel-simulator which is connected with 600
.
7. Set line voltage to 48V and line current to 40mA.
8. Connect DECT tester to Tel-simulator.
9. Input audio signal (200mVrms/1kHz tone) to Tel-simulator.
<DECT tester setting>
·
Scramble: On
·
AF Gen. to ADPCM: Off
·
AF Meter Input: ADPCM
·
AF Gen. Frequency: 1000Hz
·
AF Gen. Level: 200mVrms
10. Confirm hearing tone: 300mVrms ± 100mVrms
11. Adjust audio level if required. (Make sure current value using “getmicgain”. And
then execute the command “setmicgain xx”, where xx is the value.)
12. Confirm that the B-field audio distortion with DECT tester is < 5%.
IC2,C21,R31,
C20,C11,
R18,R16,D3,
R12,Q2,
R7,R8,Q3,
R9,R10,
D2,C1,C2,
R77,IC3,
L1,C43,C78,
C75,C69,
C48,C72,C66,
C67,C76,
C57,C73,L3,
DA1,R66,
R67,C55,C56,
R78,R79,
C54,C58,C86,
R38
25
KX-TCD150FXB / KX-TCD150FXC / KX-TCD152FXB / KX-TCA115EXB / KX-TCA115EXC
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TCD150FXC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TCD150FXC in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info