3 MMenuN a MbN: “Add new entry” a
MSelectN
4 Edit the date if necessary. a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (30 characters max.;
page 17). a MOKN
7 MbN: Select the desired alarm tone. a
MSelectN 2 times
R You can select “Off” if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MOFFN
Note:
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1 MMenuN (right soft key) a
a
MSelectN
2 To see the entries on the selected date,
press MSelectN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: “Detail” a
MSelectN
Editing an entry
1 MMenuN (right soft key) a
a
MSelectN
2 MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Edit” a MSelectN
4 Edit the date if necessary. a MOKN
5 Edit the time if necessary. a MOKN
6 Edit the text memo if necessary (30
characters max.). a MOKN
7 MbN: Select the desired alarm tone. a
MSelectN 2 times a MOFFN
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1 MMenuN (right soft key) a
a
MSelectN
2 MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Erase” a MSelectN
4 MbN: “Yes” a MSelectN a MOFFN
Erasing all entries
1 MMenuN (right soft key) a
a
MSelectN
2 MListN a MMenuN
3 MbN: “Erase all” a MSelectN
4 MbN: “Yes” a MSelectN
5 MbN: “Yes” a MSelectN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1 Handset:
MMenuN (right soft key) #130
32
For assistance, please visit http://www.panasonic.com/help
Programming