R To prevent other users from joining your
conversations with outside callers, turn the
call sharing mode off (page 25).
Transferring calls, conference
calls
Outside calls can be transferred between 2
handsets in the same radio cell.
2 handsets in the same radio cell can have a
conference call with an outside party.
1 During an outside call, press MMenuN.
2 MbN: “Intercom” a MSelectN
3 MbN: Select the desired unit. a MSelectN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press MBackN to return to the outside
call.
5 To complete the transfer:
Press MOFFN.
To establish a conference call:
MMenuN a MbN: “Conference” a
MSelectN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMenuN a MbN: “Hold” a MSelectN
To resume the conference: MMenuN
a MbN: “Conference” a MSelectN
R To cancel the conference: MMenuN a
MbN: “Stop conference” a
MSelectN
You can continue the conversation
with the outside caller.
Note:
R You can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 42).
Intercom
Intercom calls can be made between
handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press MOFFN, then press
M
N.
R You can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 42).
Making an intercom call
1 MMenuN (right soft key) a MIntercomN
2 MbN: Select the desired unit. a MSelectN
3 When you finish talking, press MOFFN.
Answering an intercom call
1 Press M
N to answer the page.
2 When you finish talking, press MOFFN.
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press M
N. When this
feature is set to “On”, the monitoring handset
for the baby monitor feature (page 31) will
also answer baby monitor calls automatically.
The default setting is “Off”.
1 MMenuN (right soft key) #273
2 MbN: Select the desired setting. a
MSaveN a MOFFN
16
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
