Menu list
Problem Cause/solution
The display is in a
language I cannot read.
R Change the display language (page 13).
I cannot activate the eco
mode.
R You cannot set eco mode when you set the DECT repeater
mode “On”. If required, set the DECT repeater mode to “Off”
(page 34).
I cannot display the
wallpaper.
R Wallpaper is displayed in the standby mode only when you
select “Digital(Small)” or “Off” for the clock setting.
Change the clock setting (page 24).
I cannot register a handset
to a base unit.
R The maximum number of base units (4) is already registered to
the handset. Cancel unused base unit registrations from the
handset (page 34).
R The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 34).
R You entered the wrong PIN. If you forget your PIN, contact an
authorised service centre.
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 10).
I fully charged the
batteries, but
– still flashes or
– the operating time
seems to be shorter.
R Clean the battery ends ( , ) and the charge contacts with
a dry cloth and charge again.
R It is time to replace the batteries (page 10).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 33).
R Activating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 14).
47
Useful Information
