588419
40
Zoom out
Zoom in
Previous page
1/88
Next page
9 MbN:
Select the desired snooze setting.
a MSAVEN
10 MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, M
N,
or MSNOOZEN to
stop the sound but keep the snooze
function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
S
ilent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Silent mode can
be set for each unit.
Using the phonebook’s group feature
(page 28), you can also select groups of
callers whose calls override silent mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
R We recommend turning the base unit ringer
off (page 34, 35) in addition to turning the
silent mode on.
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 MM
ENUN (right soft key) #238
2 MbN: Select the desired setting. a
MSAVEN
R If you select Off, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select AM or PM. a MOKN
5 E
nter the desired hour and minute you
wish to end this feature.
6 *: Select AM or PM.
7 MSAVEN a MOFFN
Changing the start and end time
1 MM
ENUN (right soft key) #237
2 Continue from step 3, “Turning silent
mode on/off”, page 40.
Selecting groups to bypass silent
m
ode
1 MMENUN (right soft key) #241
2 Select your desired groups by pressing
1 to 9.
R
” is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. “
” disappears.
3 MS
AVEN a MOFFN
Call block
T
his feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (250 max.).
Block a single number: The unit
can reject calls from specific phone
numbers.
Block range of numbers: The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly
*1
while caller information is being received. If
the caller’s phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
Off (page 41).
40
For assistance, please visit http://www.panasonic.com/help
Programming
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 40 2014/01/09 11:59:42
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-PRL262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-PRL262 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info