588420
39
Zoom out
Zoom in
Previous page
1/88
Next page
*15 If you have 2 or more key detectors.
*
16 You can select to display either a single item or multiple items on one screen at a time for
the handset menu list, recorded message list, phonebook list, caller list, and redial list. When
in multiple items display mode, you can switch the screen to confirm the detailed information
by:
pressing MDETAILN, or
pressing MMENUN a MbN: Detail a MSELECTN
*17 You can set the handset display backlight while on charge.
On: Backlight is on (dimmed).
Off: Backlight turns off after 10 seconds of charging. Additionally, less power is
consumed if you leave the handset on the base unit or charger after the battery is fully
charged.
*18 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*19 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to
pick up the waiting call.
*20 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to A if telephone line condition is not good.
*21 This menu icon is displayed when the key detector is not registered.
Alarm
A
n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 5 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
1 MMENUN (right soft key) #720
2 Select an alarm by pressing 1 to 5. a
MSELECTN
3 MbN: Select the desired alarm option. a
MSELECTN
Off
Turns alarm off. Go to step 10.
O
nce
An alarm sounds once at the set time.
Daily
An alarm sounds daily at the set time.
Go to step 5.
W
eekly
Alarm sounds weekly at the set time(s).
4 P
roceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press MSELECTN. a MOKN
5 Set the desired time.
6 *: Select AM or PM. a MOKN
7 Enter a text memo (30 characters max.).
a MOKN
8 MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
For assistance, please visit http://www.panasonic.com/help
39
Programming
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 39 2014/01/09 11:59:42
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-PRD262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-PRD262 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info