16799
108
Zoom out
Zoom in
Previous page
1/156
Next page
108
Operations
For assistance, call 1-800-435-7329.
Cause & RemedyProblem
When a function does not work, check here
before requesting help!
Problems with fax machine
General
The power cord or telephone line cord is not connected. Check the
connections (p. 27).
The dialing mode setting is wrong. Change to “TONE” or “PULSE”
(p. 36).
Disconnect the unit from the telephone line and connect the line to
a known working telephone. If the working telephone operates
properly, contact our service personnel to have the unit repaired.
If the working telephone does not operate properly, contact your
telephone company.
The ringer volume is set to off. Adjust it to a suitable level (p. 33).
The FAX ONLY mode is set. Tell them the number is only used for
faxes or change to another mode (p. 60, 61).
If this button is pressed during dialing, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialed will be redialed.
A Distinctive Ring pattern is set (p. 68, 69).
The TEL/FAX mode is set (p. 7073).
All or part of the numbers are the same. Change the number
(p. 67, 74).
I cannot make and receive calls.
I cannot make calls.
The unit does not work.
The unit does not ring.
The other party complains they only
hear a fax tone and cannot talk.
The (REDIAL/PAUSE) button does
not function properly.
The receive mode does not function
as explained on page 60.
During programming, I cannot enter
the code or ID number.
Fax - sending
The telephone line cord is connected to the EXT jack on the unit.
Connect to the LINE jack (p. 27).
The other party’s fax machine is busy or has run out of paper. Try
again.
The other party’s machine is not a facsimile. Check with the other
party.
The other party’s fax machine rings too many times. Send the fax
manually - dial the number, confirm the fax tone, then press
(START/SET/COPY).
If your line has special telephone services such as call waiting, the
service may have been activated during fax transmission. Connect
the unit to a line that does not have these services.
The extension telephone on the same line is off the hook. Hang up
the extension telephone and try again.
The white roller is dirty. Clean it (p. 116).
Cause & RemedyProblem
I cannot send documents.
The other party complains that
letters on their received documents
are distorted.
The other party complains that white
lines or black lines appear on their
received documents.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-FLM600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FLM600 in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info