For rapid access to frequently dialed numbers, the unit provides 10 entries for one-touch dial.
●
Stations 1 to 3 can be used alternatively as broadcast keys (p. 31).
1
Press DE.
Display:
/
2
For stations 1–3:
Press one of the station keys.
Press w to go to the next prompt.
For stations 4–5:
Press one of the station keys.
For stations 6–10:
Press o, then press one of the station
keys.
3
Enter the name, up to 10 characters (see
page 17 for instructions).
Example:
4
Press w.
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
●
If you want to enter a hyphen, press
k (Hyphen).
6
Press w.
!
/
●
To program other entries, repeat steps 2 to 6.
7
Press { to exit the program.
●
If you press DE
instead of {, you can print the one-
touch label card (see right).
OR USE JOG-DIAL
PRESS STATION
REGISTERED
<S02>=1114497
<S02>=
NAME=John
DIAL MODE $
OR USE JOG-DIAL
PRESS STATION
Helpful hint:
●
You can confirm the stored entries on the
display (p. 23) or on the telephone number list
(p. 71).
Note:
●
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
●
Press ) or ( to move the cursor to the
incorrect character/number, and then make
the correction.
To delete a character/number
●
Move the cursor to the character/number you
want to delete, and press { (Delete).
To print the one-touch label card with
stored names
Press DE in step 7.
Display:
/
Press w to start printing.
●
Put the card in the one-touch dial location.
YES:SET/NO:STOP
PRINT LABEL OK?
Storing names and telephone numbers
into one-touch dial!
