26435
51
Zoom out
Zoom in
Previous page
1/92
Next page
51
Setup (PC)
1
Connect the fax machine to the PC
(page 50).
To use via USB connection, you
must set the cable type to “USB”
(feature #15 on page 62).
The default setting is “PARALLEL”.
2
Start Windows 95/98/Me/NT4.0/2000/
XP and close all other applications.
You must be logged in as an
administrator in Windows NT4.0/2000/
XP.
3
Insert the included CD-ROM into your
CD-ROM drive.
The [Choose Setup Language]
dialog box will appear.
Select the desired language that you
want to use with this software from
the drop-down list. Click [OK].
The installation will automatically
start.
If the [Choose Setup Language]
dialog box does not appear:
The installation will automatically
start.
If the installation does not start
automatically:
Click [Start]. Choose [Run...]. Type
d:\setup” (where “d:” is the drive letter
of your CD-ROM drive). Click [OK].
(If you are not sure what the drive
letter is for your CD-ROM drive, use
Windows Explorer and look for the
CD-ROM drive.)
The following dialog box will appear.
Click [Cancel] to close it.
The screens shown in these
instructions are from Windows Me.
The screens may differ slightly from
those of the actual product.
The screens are subject to change
for improvement without notice.
Installing Multi-Function Station software
!
To uninstall the software
1. Click [Start].
2. Point to [Settings], then click [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Panasonic Multi-Function Station]
from the list.
5. Click [Add/Remove
...
] (Windows 95/98/Me/
NT4.0) / [Change/Remove] (Windows 2000/
XP), then follow the instructions on the screen.
The installation will start.
4
Follow the instructions on the screen
until all files have been installed.
Readiris OCR software can also be
installed. For details about OCR
software, see page 56.
If the fax machine is not connected to
your computer, the [Port Selection]
dialog box will appear. Select the port
number which you want to use. If the
fax machine is connected to your
computer, the port number will be
automatically detected.
Important notice for USB cable users
If you use a USB cable with Windows XP,
the following message may appear:
“The software you are installing for this
hardware has not passed Windows Logo
testing to verify its compatibittiy with
Windows XP”
You can continue the installation with no
problem.
KX-FLB756 (050-057) 03.4.14 9:14 PM Page 51
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-FLB756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FLB756 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info