48
Setup (PC)
1
Start Windows 95/98/Me/2000 and
close all other applications.
●
You must be logged in as an
administrator in Windows 2000.
2
Insert the included CD-ROM into your
CD-ROM drive.
●
The [Choose Setup Language]
dialog box will appear.
Select the desired language that you
want to use with this software from
the drop-down list. Click [OK].
The installation will automatically
start.
●
If the [Choose Setup Language]
dialog box does not appear:
The installation will automatically
start.
●
If the installation does not start
automatically:
Click [Start]. Choose [Run...]. Type
“d:\setup” (where “d:” is the drive letter
of your CD-ROM drive). Click [OK].
(If you are not sure what the drive
letter is for your CD-ROM drive, use
Windows Explorer and look for the
CD-ROM drive.)
The installation will start.
●
The following dialog box will appear.
Click [Cancel] to close it.
●
The screens shown in these
instructions are from Windows Me.
●
The screens may differ slightly from
those of the actual product.
●
The screens are subject to change
for improvement without notice.
Installing Multi-Function Station software
!
To uninstall the software
1. Click [Start].
2. Point to [Settings], then click [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Panasonic Multi-Function Station]
from the list.
5. Click [Add/Remove
...
] (Windows 95/98/Me) /
[Change/Remove] (Windows 2000), then
follow the instructions on the screen.
3
Follow the instructions on the screen
until all files have been installed.
●
Readiris OCR software can also be
installed. For details about OCR
software, see page 53.
●
If the fax machine is not connected to
your computer, the [Port Selection]
dialog box will appear. Select the port
number which you want to use. If the
fax machine is connected to your
computer, the port number will be
automatically detected.
Note:
●
There is also a different way to install
Multi-Function Station software. See the
attached leaflet for PC setup for details.
