Manual Panasonic KX-FL541 (page 72 of 82) (English)

16795

Zoom out

Zoom in

1/82

10. General Information

FCC and Other Information

10.3 FCC and Other Information

This equipment complies with Part 68 of the FCC

rules and the requirements adopted by the ACTA.

On the rear of this equipment is a label that

contains, among other information, a product

identifier in the format US:ACJ----------.

If requested, this number must be provided to the

telephone company.

• Registration No .....(found on the rear of the unit)

• Ringer Equivalence No. (REN)

...............................(found on the rear of the unit)

A plug and jack used to connect this equipment to

the premises wiring and telephone network must

comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant

telephone cord and modular plug is provided with

this product. It is designed to be connected to a

compatible modular jack that is also compliant.

The REN is used to determine the number of

devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in

the devices not ringing in response to an incoming

call. In most but not all areas, the sum of RENs

should not exceed five (5.0).To be certain of the

number of devices that may be connected to a

line, as determined by the total RENs, contact the

local telephone company. For products approved

after July 23,2001,the REN for this product is part

of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by

## are the REN without a decimal point (e.g.,03 is

a REN of 0.3).

If this equipment causes harm to the telephone

network, the telephone company will notify you in

advance that temporary discontinuance of service

may be required. But if advance notice isn't

practical, the telephone company will notify the

customer as soon as possible. Also, you will be

advised of your right to file a complaint with the

FCC if you believe it is necessary.

The telephone company may make changes in its

facilities, equipment, operations or procedures that

could affect the operation of the equipment. If this

happens the telephone company will provide

advance notice in order for you to make necessary

modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for

repair or warranty information, please contact a

Factory Servicenter or other Authorized Servicer. If

the equipment is causing harm to the telephone

network, the telephone company may request that

you disconnect the equipment until the problem is

resolved.

Connection to party line service is subject to state

tariffs. Contact the state public utility commission,

public service commission or corporation

commission for information.

This equipment is hearing aid compatible as

defined by the FCC in 47 CFR Section 68.316.

If your home has specially wired alarm equipment

connected to the telephone line, ensure the

installation of this equipment does not disable your

alarm equipment. If you have questions about

what will disable alarm equipment, consult your

telephone company or a qualified installer.

WHEN PROGRAMMING EMERGENCY

NUMBERS AND(OR) MAKING TEST CALLS TO

EMERGENCY NUMBERS:

1) Remain on the line and briefly explain to the

dispatcher the reason for the call.

2) Perform such activities in the off-peak hours,

such as early morning or late evenings.

The software contained in this equipment to allow

user access to the network must be upgraded to

recognize newly established network area codes

and exchange codes as they are placed into

service. Failure to upgrade the premises systems

or peripheral equipment to recognize the new

codes as they are established will restrict the

customer and the customer's employees from

gaining access to the network and to these codes.

CAUTION:

Any changes or modifications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate this

device.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

FL541.book Page 70 Wednesday, August 27, 2003 7:07 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FL541 in the language / languages: English as an attachment in your email.

The manual is 7,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic KX-FL541 Manual

Product: