16797
57
Zoom out
Zoom in
Previous page
1/92
Next page
Erasing a specific message
Press while listening to the message you
want to erase.
A long beep will also sound. The unit will then
play back the next message.
Erasing all the messages
Press to erase all the messages.
A long beep will also sound.
5
4
57
Remote Operation
Other remote operations
Voice guide example:
1. Wait for the voice guide.
2. Wait about 10 seconds.
3. Leave a message after the beep.
Monitoring the room
Press to monitor the sound for about 30
seconds in the room where the unit is installed.
After 30 seconds, a beep sounds. To continue
monitoring, press again within 10 seconds.
6
6
Recording a marker message
You can leave an additional message.
Re-recording a greeting message
You can change the contents of the TAD/FAX
greeting message.
1. Press to start recording.
A long beep will sound.
2. Speak clearly up to 16 seconds.
If you pause for over 2 seconds, 6 beeps
will sound and the recording will stop.
Repeat from step 1 within 10 seconds.
3. When finished recording, press .
The new greeting message will be played.
9
7
Skipping the greeting message
Press during the greeting message playback.
The unit will skip the rest of the greeting message.
0
Press to turn ON the message transfer.
8 1
Turning the message transfer on or off
You must pre-program a transfer telephone
number beforehand (feature #60 on page 66).
Press to turn OFF the message transfer.
8 2
If a transfer telephone number is not
programmed, you cannot turn this feature ON.
Press to turn ON the pager call.
8 3
Turning the pager call on or off
You must program a pager number beforehand
(feature #70 on page 47).
Press to turn OFF the pager call.
8 4
If a pager number is not programmed, you
cannot turn this feature ON.
Returning to TAD/FAX mode
1. Call your unit and wait for 10 rings.
The answering device will temporarily answer
the call.
2. Enter the remote operation ID during the
greeting message.
Your unit will switch to TAD/FAX mode.
Changing the receive mode
Press to change the receive mode from
TAD/FAX to TEL.
You cannot return to TAD/FAX mode in the same
call. To return to TAD/FAX mode, see below.
8 0
The message has been erased.
All messages have been erased.
All messages have been played
.
Please leave your name and
message after the beep.
Message transfer is set.
Transfer phone number is 123···.
Message transfer is off.
Transfer phone number is not set.
Pager call is set.
Pager number is 098765432.
Pager call is off.
Pager number is not set.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-FL521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-FL521 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info