57
Error Messages
For fax advantage assistance, call 1-800-435-7329.
Display!
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & solution
●
There is something wrong with the unit. Contact our service
personnel.
CALL SERVICE
●
The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 68) and try again.
CHECK DOCUMENT
●
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
CHECK MEMORY
●
The recording paper is not installed or the unit has run out of
paper. Install paper and press to clear the message.
●
The recording paper is not fed into the unit properly. Reinstall
paper (p. 13) and press to clear the message.
●
The recording paper has jammed near the recording paper
entrance. Clear the jammed paper and press to clear the
message (see “When paper has jammed near the recording
paper entrance” on page 66). Do not install folded or heavily
curled paper.
CHECK PAPER
●
The unit has a document in memory. See the other displayed
message instructions to print out the document.
FAX IN MEMORY
●
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper or clear
the jammed paper.
●
When performing memory transmission, the document being
stored exceeds the memory capacity of the unit. Transmit the
entire document manually.
FAX MEMORY FULL
●
There is no space to store new items in the navigator directory.
Erase unnecessary items (p. 22).
DIRECTORY FULL
(continued)
●
The cover is open. Close it.
COVER OPEN
●
The ink film is not installed. Install it (p. 64).
CHECK FILM
●
The ink film is empty. Replace the ink film with a new one (p. 64).
●
The ink film is slack. Tighten it (see step 4 on page 64) and install
again.
FILM EMPTY
