424269
70
Zoom out
Zoom in
Previous page
1/86
Next page
9. Help
68
The display shows CONNECTING....., but
faxes are not received.
L The incoming call is not a fax. Change the
receiving mode to TAD/FAX mode (page 39)
or TEL mode (page 38).
A blank sheet is ejected.
L If a blank sheet is ejected after the received
document is printed out, the receiving
reduction rate is not programmed correctly.
Program the proper rate in feature #36 (page
52).
L The other party placed the document in their
fax machine the wrong way. Check with the
other party.
A white line or a smudge appears on your
recording paper.
L The glass or rollers are dirty. Clean them
(page 72).
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 11 for further details.
L The other party sent a faint document. Ask
them to send a clearer copy of the document.
L The thermal head is dirty. Clean it (page 72).
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
L You may have used paper with a cotton
and/or fibre content that is over 20%, such as
letterhead or resume paper.
I cannot receive documents by pressing {*}
{#} {9} on the handset.
L You must set the remote fax activation to on
(feature #41, page 52) beforehand.
L Press {*} {#} {9} firmly.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 69).
L The call BAR feature was activated on the
handset. Deactivate this feature (page 56).
L The same number as the remote fax
activation code (feature #41 of base unit
programming on page 52) is programmed as
a call restricted number (page 59) on the
handset. Change the code or cancel the
restrict number from call restriction feature
(page 59).
L The direct call feature (page 57) was
activated on the handset. Deactivate this
feature.
The other party complains that they cannot
send a document.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 69).
L The unit is not in TAD/FAX or FAX ONLY
mode. Select the desired mode using feature
#77 (page 54) and press {AUTO ANSWER}
repeatedly until TAD/FAX or FAX ONLY mode
is displayed.
I cannot select the desired receiving mode.
L If you want to set TAD/FAX or FAX ONLY
mode:
select the desired mode using feature #77
(page 54), and
press {AUTO ANSWER} repeatedly until
the desired mode is displayed.
L If you want to set TEL mode:
press {AUTO ANSWER} repeatedly until
TEL mode is displayed.
9.3.5 Copying
The unit will not make a copy.
L You cannot make a copy during
programming. Make the copy after
programming.
L You cannot make a copy during telephone
conversation.
A black line, a white line or smudge appears
on the copied document.
L The glass or rollers are dirty. Clean them
(page 72).
The copied image is distorted.
L The thermal head is dirty. Clean it (page 72).
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 11 for further details.
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
ABC
Original
Copy
FC195E.book Page 68 Wednesday, March 5, 2003 7:15 PM
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info