424269
48
Zoom out
Zoom in
Previous page
1/86
Next page
6. Answering Device
46
the unit will beep twice and pause message
playback.
To continue playback, press {8} within 10
seconds after hearing the 2 beeps.
6.4.3 Other remote operations
Erasing a specific message
Press {*}{4} while listening to the message you
want to erase.
Voice guide:
The message has been erased.
L A long beep will sound. The unit will then play
back the next message.
Erasing all the messages
Press {*}{5} to erase all the messages.
Voice guide:
All messages have been erased.
L A long beep will sound.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1. Wait for the voice guide.
Voice guide:
All messages have been played.
2. Wait about 10 seconds.
Voice guide:
Please leave your name and message after
the beep.
3. Leave a message after the beep.
Re-recording your greeting message
You can change the TAD/FAX greeting message.
1. Press {7} to start recording.
L A long beep will sound.
2. Speak clearly for up to 16 seconds.
L If you pause for over 2 seconds, 6 beeps
will sound and the recording will stop.
Repeat from step 1 within 10 seconds.
3. When finished recording, press {9}.
L The new greeting message will be played.
Skipping the greeting message
Press {0} during the greeting message
playback.
L The unit will skip the rest of the greeting
message.
Turning message transfer on or off
You must program a transfer telephone number
beforehand (feature #60, page 53).
Press {8}{1} to turn on message transfer.
Voice guide example:
Message transfer is set. Transfer phone number
is 123...
Press {8}{2} to turn off message transfer.
Voice guide example:
Message transfer is off.
Turning pager call on or off
You must program a pager number beforehand
(feature #70, page 49).
Press {8}{3} to turn on pager call.
Voice guide example:
Pager call is set. Pager number is 098765432.
Press {8}{4} to turn off pager call.
Voice guide example:
Pager call is off.
Changing the receive mode
Press {8}{0} to change the receive mode from
TAD/FAX to TEL.
L You cannot return to TAD/FAX mode in the
same call. To return to TAD/FAX mode, see
the following.
Setting to TAD/FAX or FAX ONLY mode
from TEL mode
1. Call your unit and wait for 10 rings.
L You will hear a beep signal.
2. Enter the remote operation ID (feature #11,
page 51) within 8 seconds.
L A beep will sound.
3. To switch to FAX ONLY mode:
Press {*} within 3 seconds.
To switch to TAD/FAX mode:
Wait for 3 seconds, then the greeting
message will be played.
4. Hang up the handset.
Voice Mailbox
6.5 Allowing callers to
leave private messages
This unit has two private mailboxes. A caller can
leave a private message in a specific mailbox.
Only the person who knows the password can
retrieve a message from a mailbox. This feature
is useful when you share this unit with other
people.
6.5.1 To use a mailbox
1 Record your TAD/FAX greeting message
(page 43).
FC195E.book Page 46 Wednesday, March 5, 2003 7:15 PM
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info