628526
18
Zoom out
Zoom in
Previous page
1/36
Next page
ID Modification
I
n ID Modification mode, the ID of the repeater (RPN [Radio Part Number]) can be selected. Registered
repeaters are automatically assigned an ID during the registration process. This ID can be changed by
following the procedure below.
1 In Operation mode, press the PROGRAM button to switch to ID Confirmation/Verification Tone mode.
The STATUS indicator will turn amber.
2 Press and hold down the PROGRAM button for 5 seconds.
The STATUS indicator will flash amber quickly.
3 Release the PROGRAM button to enter ID Modification mode.
The STATUS indicator will turn amber.
The RSSI/ID indicator will flash red once to indicate that the ID is currently set to 1.
4 Press the PROGRAM button to select the desired ID.
The ID will change by one each time the PROGRAM button is pressed.
5 Press and hold down the PROGRAM button for 5 seconds to assign the ID to the repeater.
The RSSI/ID indicator will turn red.
6 Release the PROGRAM button to reset the repeater.
The STATUS indicator and the RSSI/ID indicator will turn amber for 2 seconds and then the repeater
will return to Operation mode.
Using the Repeater
ID Confirmation/Verification Tone Mode
T
he ID of currently registered repeaters can be checked in ID Confirmation mode.
Also, the coverage area of registered repeaters can be checked using a PS, in Verification Tone mode.
When the beep is no longer heard, the PS is no longer in range of the repeater.
1 In Operation mode, press the PROGRAM button to switch to ID Confirmation/Verification Tone mode.
The STATUS indicator will turn amber.
2 The current ID is indicated by the number of times the RSSI/ID indicator flashes green. At the same
time, the verification tone will be activated, and the coverage of the repeater can be checked.
Note
If the repeater loses synchronization with the CS/destination repeater in ID Confirmation/Verification
Tone mode, the repeater will automatically reset. After synchronization is established, the repeater
will automatically enter ID Confirmation/Verification Tone mode again.
3 Return the repeater to Operation mode by pressing the PROGRAM button again.
The verification tone will be deactivated.
Note
If you press and hold down the PROGRAM button for 5 seconds, the repeater will enter "ID
Modification" mode.
Site Survey Mode
T
his function can be used to measure the transmission quality, and identify problematic transmission
areas of the repeater installation. This function can be used when registered or de-registered.
18
1. Linking to Cell Stations
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-A406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-A406 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic KX-A406

Panasonic KX-A406 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info