711556
284
Zoom out
Zoom in
Previous page
1/288
Next page
- 284 -
When is not highlighted in yellow, even if you touch the screen, the position buttons will not
be displayed. To display them, touch , and touch the screen while is highlighted in
yellow.
If you have not registered positions to the position buttons yet, touch to register them.
(l 284)
3 Press the recording start/stop button.
(When [Party Scene]/[Moving Object] is selected)
Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It
takes time until recording starts.
The Remote Pan Tilt Cradle operates within the range set in advance.
(When [Manual]/[Preset Positions] is selected)
Performing the operation of Step 2 during recording may cause the recording screen to shake or
the Remote Pan Tilt Cradle to move from its original location.
To switch the Remote Pan Tilt Cradle Mode
Tou c h .
The selection screen of the Remote Pan Tilt Cradle Mode is displayed. Touch the desired mode.
To exit the Remote Pan Tilt Cradle
Tou c h [EXI T].
The Remote Pan Tilt Cradle rotates and returns to its home position.
After the operation, the Remote Pan Tilt Cradle turns off. Before removing this unit, disconnect
the USB cable.
Registering positions to the position buttons
1 Touch .
2 Touch the position button to which you want to register a position.
You can register positions to [POS1]/[POS2]/[POS3]/[POS4]/[POS5]
The position buttons without a registered position are indicated as [Not set].
3 Determine a position with ///
You can also operate the zoom with the zoom lever.
4 Touch [ENTER].
To register positions to other position buttons, repeat Steps 2–4.
To adjust a position that has already been registered to a position button, touch the position
button to which the position you want to adjust is registered, and follow Steps 3–4.
Moving the Remote Pan Tilt Cradle to a registered position
1 Touch .
Check that is highlighted in yellow.
The position buttons ([POS1]/[POS2]/[POS3]/[POS4]/[POS5]/[HOME]) will be displayed.
These buttons will disappear when no touch operation is performed for approximately 5 seconds.
To display them again, touch the screen.
2 Touch the desired position button.
The Remote Pan Tilt Cradle will move to the registered position of the selected position button.
You cannot select position buttons without a registered position.
If you touch [CANCEL], the Remote Pan Tilt Cradle will stop in a midway position.
To return to the home position, touch [HOME].
Setting up [Preset Positions]
POS
POS
POS
POS
POS
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 284 ページ 2018年2月22日 木曜日 午後12時30分
284


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic HC-VX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic HC-VX1 in the language / languages: English as an attachment in your email.

The manual is 14,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic HC-VX1

Panasonic HC-VX1 User Manual - German - 288 pages

Panasonic HC-VX1 User Manual - Dutch - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info