628269
5
Zoom out
Zoom in
Previous page
1/194
Next page
4 (E)
ENGLISH
How to turn the power on and off
 Turning the power on
When supplying power to turn on the unit
1 Set all the power switches of the units and
devices connected in the system to ON.
2 Supply power to the unit.
 This unit does not have a power switch.
When power is supplied to it, the status display lamp
will light up orange.
What happens next is that the initial operations are
performed, and when they have been completed, the
POWER ON mode is established, images are output
and control becomes possible.
When the POWER ON mode is established, the
status display lamp will light up green.
 It takes about 30 seconds per unit for the initial
settings operation to be completed. During this
period, the unit cannot be operated.
(Status display lamp: light up orange)
 When operation is transferred to the STANDBY
mode: The current pan-tilt position is stored in the
memory (as a POWER ON preset), and the camera
moves so that it points toward the back.
 When operation is transferred to the POWER ON
mode: The camera moves to the position which was
stored in the memory (as a POWER ON preset)
when operation was transferred to the STANDBY
mode.
Notes
When turning on the supply of power to the unit
from the STANDBY mode
1 Check that the unit is in the STANDBY mode.
 Check that the STANDBY mode has been
established (the status display lamp is lit in orange).
2 Press one of the [CAM1] to [CAM4] buttons
on the wireless remote controller to select the
unit.
3 Press the [ON/STANDBY] button on the
wireless remote controller for at least
2 seconds.
The POWER ON mode is established, images are
output, and control can be exercised.
 The unit’s status display lamp now lights up green.
 When operation is transferred to the POWER ON
mode: The camera moves to the position which was
stored in the memory (as a POWER ON preset)
when operation was transferred to the STANDBY
mode.
Note
4 If a multiple number of units are going to be
used, repeat steps
2 and 3 as required.
The unit’s status display lamp blinks green when a signal
matched by the remote control ID has been received, and
it blinks orange when a signal that is not matched by the
remote control ID has been received.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic GP-VD150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic GP-VD150 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic GP-VD150

Panasonic GP-VD150 Installation Guide - English, German, French, Italian, Spanish - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info