628262
19
Zoom out
Zoom in
Previous page
1/26
Next page
19
How to turn the power on and off
Turning the power on
 This unit does not have a power switch. Its power is turned on when power is supplied to the unit.
Unit’s power OFF
Status display lamp: Off
Power is supplied.
When the power of the HD Visual Communication Unit has been turned on and the
unit has been connected properly (about 30 seconds after)
Standby mode
Status display lamp: Orange
Power ON mode
Status display lamp: Green
 The camera moves so that it is positioned at the home position.
Turning the power off
 When the supply of power to the unit is cut off, the unit’s power is turned off.
The power can be turned off regardless of the unit’s mode (standby mode or power ON mode).
Concerning the mode transitions
[Description of each mode]
Mode
Status
Standby mode
Status display lamp: Orange
When the HD Visual Communication Unit is in one of the statuses described below:
 HD Visual Communication Unit is in screen standby mode.*
 The power of the HD Visual Communication Unit is OFF or the camera has not been
connected to the HD Visual Communication Unit.
*
When the administrator menu settings of the HD Visual Communication Unit are used to select [HDMI
Settings] followed by [Standby] and then [Standby] is set from [OFF] to [ON], the transition of the
status of the camera mode becomes linked with the screen standby status of the unit.
For details of
the screen standby function, refer to the operating instructions of the HD Visual Communication Unit.
Power ON mode
Status display lamp: Green
Status in which the camera has been connected properly to the HD Visual Communication
Unit and can be controlled
The transition of the status of the camera mode is linked with the status of the HD Visual Communication Unit.
[Linkage with the screen standby status of the HD Visual Communication Unit]
When the [Video Out On/Off] button on the remote
controller is pressed, etc.
Standby mode
Status display lamp: Orange
Power ON mode
Status display lamp: Green
 The camera is moved so that it
is positioned toward the lower
right.
 The camera’s direction is returned
to the position before the transition
to the standby mode.
When the [Video Out On/Off] button on the remote
controller is pressed, etc.
* When pressing the [Video Out On/Off] button
repeatedly, make sure to wait at least 10 seconds
between each press.
[Linkage with the status of the connection with the HD Visual Communication Unit]
Standby mode
Status display lamp: Orange
Power ON mode
Status display lamp: Green
 The camera is moved so that it
is positioned toward the lower
right.
60 seconds after detecting that the HD Visual
Communication Unit is powered OFF*/60 seconds
after detecting that the HDMI cable is not connected
* Mode transition when power is turned ON or OFF only
occurs on the KX-VC300 and KX-VC600.
Connection of the HDMI cable with the HD Visual
Communication Unit’s power ON/Power of the HD Visual
Communication Unit is ON while the HDMI cable is connected.*
 The camera’s direction is returned
to the position before the transition
to the standby mode.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic GP-VD131 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic GP-VD131 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic GP-VD131

Panasonic GP-VD131 User Manual - German - 26 pages

Panasonic GP-VD131 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info