Manual Panasonic EYFLA6 (page 6 of 56) (English, French, Spanish)

568593

Zoom out

Zoom in

1/56

7) Do not strain the tool by holding the speed

control trigger halfway (speed control

mode) so that the motor stops.

Symbol Meaning

Volts

Direct current

No load speed

… min

-1

Revolutions or reciprocations

per minutes

Electrical capacity of battery

pack

. ASSEMBLY

Attaching or Removing Bit

NOTE:

•

When attaching or removing a bit, discon-

nect battery pack from tool or place the

switch in the center position (switch lock).

1. Hold the collar of quick connect chuck and

pull it out from the tool.

. Insert the bit into the chuck. Release the

collar.

The collar will return to its original position

when it is released.

Pull the bit to make sure it does not come out.

5. To remove the bit, pull out the collar in the

same way.

CAUTION:

•

If the collar does not return to its origi-

nal position or the bit comes out when

pulled on, the bit has not been properly

attached. Make sure the bit is properly

attached before use.

EYFLA4A/EYFLA4AR/EYFLA5A/EYFLA5AR

12 mm

(15/32")

9 mm – 9.5 mm

(

23/64" – 3/8")

6.35 mm

(1/4")

Attaching Socket (Pin type)

• Remove the socket’s rubber ring and pin.

rubber

ring

groove

1 Attach the socket to the tool.

2 Insert

the pin. (Taking care to align the pin

holes on the socket and tool.)

3 A

ttach the rubber ring by sliding it into place

over the groove.

NOTE:

Be sure to attach the rubber ring to prevent

the pin from falling out.

Removing Socket (Pin type)

1 Remove the rubber ring.

2 Remove the pin.

3 R

emove the socket from the tool.

NOTE:

Keep the temperature of the tool above

the

freezing point (0°C/32°F) when attach-

ing sockets to or detaching them from

the square drive on the tool. Do not use

excessive

force when attaching or detach-

ing sockets.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EYFLA6 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EYFLA6 Manual

Product: