502406
10
Zoom out
Zoom in
Previous page
1/124
Next page
-
10
-
CAUTION:
To prevent the risk of fire or damage to
the battery charger.
Do not use power source from an
engine generator.
Do not cover vent holes on the charger
and the battery pack.
Unplug the charger when not in use.
IV
. LAMP INDICATIONS
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange Flashing
Charger is plugged into the AC outlet.
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin
when temperature of battery pack drops.
Charging is not possible. Clogged with
dust or malfunction of the battery pack.
V. MAINTENANCE
Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine,
or other volatile solvents for cleaning.
VI.TIGHTENING
TORQUE
The power required for tightening a bolt will
vary, according to bolt material and size, as
well as the material being bolted. Choose
the length of tightening time accordingly.
Reference values are provided below.
(They may vary according to tightening conditions.)
Factors Affecting Tightening
Torque
The tightening torque is affected by a wide
variety of factors including the followings.
After tightening, always check the torque
with a torque wrench.
1) Voltage
When the battery pack becomes nearly
discharged, the voltage decreases and the
tightening torque drops.
Bolt Tightening Conditions
0.5 1 1.5 2 32.5
M12
M10
M8
Tightening time (Sec.)
Tightening torque
M8.M10.M12 x 25mm Standard bolt
(Bolt size : Millimeters)
N
m
(kgf-cm)
19.6
(200)
39.2
(400)
58.8
(600)
78.5
(800)
98.1
(1000)
M8.M10.M12 x 25mm High tensile bolt
0.5 1 1.5 2 32.5
M12
M10
M8
Tightening time (Sec.)
Tightening torque
19.6
(200)
39.2
(400)
58.8
(600)
78.5
(800)
98.1
(1000)
117.6
(1200)
N m
(k
gf-cm)
Bolt
Nut
Washer
Steel plate
thickness10mm(3/8")
Washer
Spring washer
Tightening conditions
The following bolts are used.
Standard bolts: Strength type 6.8
High tensile type 12.9
Explanation of the strength type
6.8
Bolt yield point
(80% of tenslie strength)
48
kf/mm
2
(68,000psi)
Bolt tensile strength 60
kf/mm
2
(85,000psi)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY7202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY7202 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info