391200
9
Zoom out
Zoom in
Previous page
1/196
Next page
- 9 -
Additional Safety Warnings Spe-
cific for Abrasive Cutting-Off Op-
erations:
1)
Do not “jam” the cut-off wheel or
apply excessive pressure. Do
not attempt to make an exces-
sive depth of cut.
Overstressing
the wheel increases the loading
and susceptibility to twisting or
binding of the wheel in the cut and
the possibility of kickback or wheel
breakage.
2)
Do not position your body in line
with and behind the rotating
wheel.
When the wheel, at the point
of operation, is moving away from
your body, the possible kickback
may propel the spinning wheel and
the power tool directly at you.
3)
When wheel is binding or when
interrupting a cut for any reason,
switch off the power tool and
hold the power tool motionless
until the wheel comes to a com-
plete stop. Never attempt to re-
move the cut-off wheel from the
cut while the wheel is in motion
otherwise kickback may occur.
Investigate and take corrective ac-
tion to eliminate the cause of wheel
binding.
4)
Do not restart the cutting opera-
tion in the workpiece. Let the
wheel reach full speed and care-
fully reenter the cut.
The wheel
may bind, walk up or kickback if the
power tool is restarted in the work-
piece.
5)
Support panels or any oversized
workpiece to minimize the risk of
wheel pinching and kickback.
Large workpieces tend to sag under
their own weight. Supports must be
placed under the workpiece near the
line of cut and near the edge of the
workpiece on both sides of the
wheel.
6)
Use extra caution when making a
“pocket cut” into existing walls or
other blind areas.
The protruding
wheel may cut gas or water pipes,
electrical wiring or objects that can
cause kickback.
Symbol Meaning
V Volts
Direct current
n
Rated speed
…min
-1
Revolutions or reciproca-
tions per minutes
Ah
Electrical capacity of
battery pack
To reduce the risk of
injury, user must read
and understand instruc-
tion manual.
For indoor use only.
Always wear eye protec-
tion
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ey4640ln1s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ey4640ln1s in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info