Manual Panasonic EY45A2 (page 12 of 176) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

568605

Zoom out

Zoom in

1/176

Switch lock lever

Front grip

Handle

Power switch

Fig. 8

CAUTION:

• Check that the switch lock lever works.

If power switch can be activated without

depressing the switch lock lever, discontinue

use immediately. Take the tool to an authorized

service center.

• Always hold the handle with one hand and the

front grip with the other. (See Fig. 8) Maintain a

firm grip and depress the switch fully.

• The blade should not touch the cutting material

before you start the motor. Wait until the blade

reaches full speed before starting a cut.

• This tool has no provision to lock the power

switch in the “ON” position, and you must not

attempt to secure it in the “ON” position.

3. Start cutting when the blade reaches full

speed.

CAUTION:

• To prevent reaction when starting operation,

the blade starts at reduced speed. (Soft start)

4. During cutting, keep your cutting line straight.

Move the tool forward at a steady speed,

while looking at the tip of the blade through

the transparent guard.

WARNING

• To prevent dangerous kickback, keep the

shoe of the tool flat on the surface of the

material being cut.

• Never force the tool. Use light and continuous

pressure.

5. If the motor become too warm, stop cutting.

Let the tool cool down before continuing work.

6. It is always a safe practice to remove the bat-

tery pack after use and before storing the tool.

Cutting depth adjustment

• Remove battery pack.

• Loosen the depth adjustment nut and adjust

the cutting depth, using the graduations on the

lower guard to gauge the depth. Once finished

adjusting the depth, tighten the depth adjust-

ment nut securely.

* When wood material is 10 mm (3/8”) or less

thick, adjust the cutting depth so that the blade

protrudes approx. 5 mm (3/16”) from the bottom

of the material.

Depth

adjustment

nut

Pull down

Loosen

Tighten

Fig. 9

Rip fence (EY3500B7727)

(Available as an accessory, not included)

Rip fence is convenient for rip cuts and repeated

cuts of uniform width.

• Remove battery pack.

• Insert rip fence and adjust cutting width. (See

Fig. 10)

• Fasten screw securely to fix rip fence.

Insert and

adjust

Fasten screw

Rip fence

Fig. 10

EY45A2(EU).indb 12 2014-1-15 10:13:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY45A2 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EY45A2 Manual

Product: