Manual Panasonic EY4542 (page 11 of 212) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

502392

Zoom out

Zoom in

1/212

Using the Tool

CAUTION:

To reduce the risk of injury read the Safety

Instructions at the front of this manual before

using the tool.

WARNING

To reduce the risk of injury, wear safety gog-

gles or glasses with side shields while using the

tool. Additionally, wear a dust mask when cutting

materials that generate excessive particulate

matter. Do not use tool in the rain. Doing so may

result in electric shock or cause the tool to emit

smoke.

Do not cut materials on which there is any

paint thinner, gasoline, oil, or similar build-up.

Doing so may cause the dust case to crack,

resulting in injury.

Follow these steps:

Hold the tool with both hands. (See Fig. 8) Do

not attempt to remove cut material when blade

is moving.

1. Line up the sight line on shoe with your cut

ting line. (See Fig. 7)

Alignment with cutting line

• Position the notch on the shoe over the cutting

line, aligning the top and bottom corners of the

diamond-shaped opening with the line.

As the cutting position may differ depending on

the blade, do a trial cut beforehand.

Cutting line

Notch

Fig. 7

2. Press the switch lock lever down, then

squeeze the power switch to start the motor,

and then release the switch lock lever.

Switch lock lever

Front grip

Handle

Power switch

Fig. 8

CAUTION:

• Check that the switch lock lever works.

If power switch can be activated without

depressing the switch lock lever, discontinue

use immediately. Take the tool to an authorized

service center.

• Always hold the handle with one hand and the

front grip with the other. (See Fig. 8) Maintain a

firm grip and depress the switch fully.

• The blade should not touch the cutting material

before you start the motor. Wait until the blade

reaches full speed before starting a cut.

• This tool has no provision to lock the power

switch in the “ON” position, and you must not

attempt to secure it in the “ON” position.

3. Start cutting when the blade reaches full

speed.

4. During cutting, keep your cutting line straight.

Move the tool forward at a steady speed,

while looking at the tip of the blade through

the transparent guard.

WARNING

• To prevent dangerous kickback, keep the

shoe of the tool flat on the surface of the

material being cut.

• Never force the tool. Use light and continuous

pressure.

5. If the motor become too warm, stop cutting.

Let the tool cool down before continuing work.

6. It is always a safe practice to remove the bat

tery pack after use and before storing the tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY4542 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EY4542 Manual

Product: