Manual Panasonic EY3552 (page 14 of 124) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

502386

Zoom out

Zoom in

1/124

1.Place the wider part of the shoe on the part of

the work piece which is solidly supported (See

Fig.10), never on the section that will fall off

when the cut is made. (See Fig.11)

Hold the cutter firmly to prevent loss of control.

Working carelessly can cause severe personal

injury.

2.Make sure the blade stops.

Even though your metal cutter has a brake,

before setting the metal cutter down, make

sure the blade has come to a complete stop

and the lower guard has closed.

3.Do not use if anything seems unusual. Remove

battery pack immediately.

If the metal cutter body becomes very hot, or

does not work properly, remove the battery

pack and do not use. Have it checked by an

authorized service center.

WARNING

To prevent the risk of serious personal injury

or fire, do not try to repair the metal cutter

by yourself. Never disassemble or modify the

metal cutter body. There are no user-repair-

able parts inside.

4.NEVER ALLOW THE CUTTER TO COME IN

CONTACT WITH YOUR BODY.

After completing a cut, do not allow the cutter

to brush against your leg or side.

Since the lower guard is retractable, it could

catch on your clothing and expose the blade.

Keep clothing away from metal cutter. Be

aware of the exposed blade sections that exist

in both the upper and lower guard areas.

WARNING

Because cutting metal creates sparks;

• Always use safety goggles.

• Do not use metal cutter near any flammable

substance or in an area where flammable

substances are used. Fire and burn injury

could result.

5.Never engage the spindle lock while blade is

running, or engage in an effort to stop the tool.

Never turn the switch on when the spindle lock

is engaged. Serious damage to your metal cut-

ter will result.

V. MAINTENANCE

WARNING

To avoid severe personal injury, always

remove the battery pack from the metal cutter

before starting any maintenance procedure.

CAUTION:

To assure product SAFETY and RELIABILITY,

servicing should be performed by an authorized

service center. Always insist on genuine Panasonic

replacement parts.

Removing Blade

CAUTION:

The blade will be hot right after cutting. Be sure to

let the blade cool down before removing it.

Follow these steps:

1.Remove the battery pack from the metal cutter.

2.Hold the spindle lock button down. This pre-

vents the blade from rotating.

3.Use the provided hex wrench to loosen the hex

bolt.

NOTE:

Keep the hex wrench in the storage slot on the

metal cutter’s body when not using it.

4.Remove the hex bolt and outer washer.

5.Use the lower guard lift lever to retract (open)

the lower guard.

6.Carefully remove the blade.

7.Clean the metal cutter if necessary.

CAUTION:

Be careful to avoid cutting your hands on the

blade.

• When disposing of a blade, secure it inside

heavy or corrugated paper. This will help pre-

vent anyone from being cut by the discarded

blade.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY3552 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EY3552 Manual

Product: