Manual Panasonic EY3552 (page 8 of 124) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

502386

Zoom out

Zoom in

1/124

I. INTRODUCTION

Thank you for purchasing the Panasonic Metal

Cutter. The powerful cutting action of this cutter,

combined with the convenience of its recharge-

able battery pack, provides you with great metal

cutting performance.

This Metal Cutter is only to be used for cutting

unhardened ferrous metal.

DANGER

This product is a cutting tool, designed to cut

through metal. It has a rotating blade which is

capable of cutting you deeply, causing seri-

ous injury or death. As a result, please read

this manual and the cautionary markings on

the tool carefully, and obey all of the Safety

Instructions to avoid such injury.

WARNING

To avoid injury, never insert your finger or any

other object into any opening of the metal cutter.

How to Use This Manual

•Please read this manual completely before start-

ing to cut with your metal cutter. If you let some-

one else use the metal cutter, make sure they

either read this manual or are fully instructed in

the proper use and all safety precautions con-

cerning the metal cutter.

•Please keep this manual for future reference. It

contains important safety information that you

must follow to use the metal cutter safely.

•This manual and product use the following signal

words:

NOTE

Notes provide additional information that you

should know about the metal cutter.

CAUTION

Caution indicates a potentially hazardous situ-

ation, which could result in minor or moderate

injury if not avoided. Cautions also alert you to

unsafe practices to be avoided.

WARNING

Warning indicates a potentially hazardous situa-

tion, which could result in serious injury or death

if not avoided.

DANGER

Danger indicates a imminent hazard which will

result in serious injury or death if not avoided.

Read “the Safety Instructions” booklet and the

following before using.

II.

ADDITIONAL SAFETY

RULES

Safety instructions for all

saws

DANGER

• Keep hands away from cutting area and

the blade. Keep your second hand on

auxiliary handle, or motor housing. If both

hands are holding the saw, they cannot be

cut by the blade.

• Do not reach underneath the workpiece.

The guard cannot protect you from the

blade below the workpiece.

• Adjust the cutting depth to the thickness

of the workpiece. Less than a full tooth of

the blade teeth should be visible below the

workpiece.

• Never hold piece being cut in your hands

or across your leg. Secure the workpiece

to a stable platform. It is important to sup-

port the work properly to minimize body

exposure, blade binding, or loss of control.

• Hold power tool by insulated gripping

surfaces when performing an operation

where the cutting tool may contact hid-

den wiring or its own cord. Contact with

a “live” wire will also make exposed metal

parts of the power tool “live” and shock the

operator.

• When ripping always use a rip fence or

straight edge guide. This improves the

accuracy of cut and reduces the chance of

blade binding.

• Always use blades with correct size and

shape (diamond versus round) of arbour

holes. Blades that do not match the mount-

ing hardware of the saw will run eccentri-

cally, causing loss of control.

• Never use damaged or incorrect blade

washers or bolt. The blade washers and

bolt were specially designed for your saw,

for optimum performance and safety of

operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY3552 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EY3552 Manual

Product: