78682
6
Zoom out
Zoom in
Previous page
1/104
Next page
-
6
-
Reference for Adjusting Torque
Setting
Torque Use
1
Approx: 0.29 N
·
m
(3.0 k
g
f-cm or 2.6 in-lbs)
For driving
screws
5
Approx: 0.82 N
·
m
(8.4 kgf-cm or 7.3 in-lbs)
9
Approx: 1.35 N
·
m
(13.8 kgf-cm or 12.0 in-lbs)
13
Approx: 1.88 N
·
m
(19.2 kgf-cm or 16.6 in-lbs)
17
Approx: 2.41 N
·
m
(24.6 kgf-cm or 21.3 in-lbs)
21
Approx: 2.94 N
·
m
(30.0 kgf-cm or 26.0 in-lbs)
Approx: 4.4 N
·
m
(45.0 kgf-cm or 39.0 in-lbs)
For power-
ful driving
screws and
drilling
When using at high speeds, set the
clutch at 10 or below. (Operation
stops at the maximum torque of 1.5
N·m (15 kgf-cm) when the scale is
higher.)
The auto shut-off function may
become inoperable at high clutch
settings when battery power drops.
Recharge the battery in that case.
NOTE:
The chart is only a reference. The
torque settings may differ by materi-
als, types of screws, etc. Please test
it at your own conditions before use.
Battery Low Warning Lamp
<Battery low warning lamp>
Off
(normal
operation)
Flashing
(No charge)
Battery
protection
feature active
Excessive (complete) discharging of
Li-ion batteries shortens their service
life dramatically. The driver includes a
battery protection feature designed to
prevent excessive discharging of the
battery pack.
●The batteryprotectionfeatureacti
-
vates immediately before the bat-
tery loses its charge, causing the
battery low warning lamp to flash.
●If you notice thebatterylowwarn
-
ing lamp flashing, charge the bat-
tery pack immediately.
Using the LED Light
Use the LED light on jobs in dark
locations such as attics to illuminate
your workspace.
CAUTION
●TheLEDlightisintendedforuseas
a supplemental light source. Do not
useitasaashlight.
Doing so may result in accident or
injury.
●Donotlookatthelightorshineit
directly into your eyes.
Continuous exposure to the LED
light may damage your eyes.
1. Press to toggle the light on
and off.
●Tousethelightimmediatelyafter
attaching the battery pack or after
the drill has not been used for 5
minutes or more, operate the drill
briefly.
The light will automatically turn
off if the drill is not used for 5
minutes.
The light uses an extremely small
amount of current. Using the light
has a negligible effect on the
operational capacity of the drill.
EY7410(EU).indb 6 2006/09/11 15:50:10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY 7410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY 7410 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info