Manual Panasonic EY 3544 (page 6 of 80) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish, Norwegian, Finnish)

110177

Zoom out

Zoom in

1/80

To prevent the trigger switch from

being accidentally pulled, a lock-off

button switch lock lever is provided.

Always make sure the switch is locked

when carrying or storing the tool to

eliminate unintentional starting.

To start the motor, press the switch

lock lever, then squeeze the trigger

switch.

WARNING:

To reduce the risk of injury, keep

hands away from the blade and

other moving parts.

Starting and Stopping

To start the tool, grasp the handle

firmly. Press the switch lock lever,

which can be pressed in from either

left or right side of the tool.

Then pull the trigger switch.

To stop the tool, release the trigger.

Allow the tool to come to a complete

stop before removing the blade from a

partial cut or before laying the tool down.

Controlling speed by Trig-

ger Switch

The reciprocating saw is equipped with

a trigger speed control switch. It may

be operated at any speed from zero

stroke per minute to full speed. Always

start tool before blade contacts the

workpiece. To vary the speed, simply

increase or decrease the pressure on

the trigger. The further the trigger is

pulled, the greater the speed.

Cutting materials

Before the blade contacts the work-

piece, grasp the handle firmly and

pull the trigger. Begin cutting at slow

speed, gradually increasing speed as

you cut. When cutting into materials or

hard materials that can not be cut from

an edge, drill a starting hole larger

than the widest part of the blade.

CAUTION:

• Always press the shoe firmly

against the workpiece during oper-

ation. If the shoe is held away from

the workpiece during operation,

strong vibration and/or twisting will

be produced, causing the blade to

snap dangerously.

• Always wear gloves to protect your

hands from flying hot chips when

cutting metal.

• Always use a suitable coolant (cut-

ting oil) when cutting metal. Failure

to do so will cause premature

blade wear.

• If the tool is operated continuously

until the battery pack has dis-

charged, allow the tool to rest for

15 minutes before proceeding with

a fresh battery pack.

Press the shoe firmly against the work-

piece. Do not allow the tool to bounce.

Bring the blade into light contact with

the workpiece. First, make a pilot

groove, using a slower speed. Then

use a faster speed to continue cutting.

For Appropriate use of

Battery pack

Ni-MH Battery pack (EY9251)

Charge the Ni-MH battery fully be-

fore storage in order to ensure a

longer service life.

The ambient temperature range

is between 0°C (32°F) and 40°C

(104°F).

If the battery pack is used when the

battery temperature is below 0°C

(32°F), the tool may fail to function

properly. In that case, charge the

battery until charging is completed

for appropriate functioning of the bat-

tery.

When battery pack is not in use, keep

it away from other metal objects like:

paper clips, coins, keys, nails, screws,

or other small metal objects that can

make a connection from one terminal

to another.

Shorting the battery terminals togeth-

er may cause sparks, burns or a fire.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY 3544 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EY 3544 Manual

Product: