Adattare il manicotto di pressione
I
6968
Inserimento/sostituzione delle batterie
Cambiare le batterie quando...
Sul display compare il simbolo relativo alla sostituzione delle
batterie. Nota: se si usano accumulatori ricaricabili, quando questi
sono scarichi lo strumento può arrestarsi senza alcun preavviso.
Vi invitiamo a contribuire alla salvaguardia dell'ambiente
osservando le disposizioni nazionali e/o locali riguardanti il
riciclaggio di materiali usati, quando si deve provvedere allo
smaltimento dello strumento e delle sue batterie al termine della
loro durata utile.
Usare solo batterie alcaline.
1. Far scorrere il coperchio del vano
batterie come mostrato in figura.
2. Inserire le due batterie rispettando
la polarità (+/–).
3. Far scorrere il coperchio del vano
batterie per chiuderlo fino a sentire
il clic.
La pressione arteriosa si misura sul polso sinistro.
Essa dovrebbe essere circa 2
cm sotto la base del polso,
questo dovrebbe essere rilassato
con il palmo orientato verso l'alto.
Posizionare lo
strumento al
centro del lato
interno del
polso.
Linea mediana del polso
Circa 2 cm
1. Usare la striscia di riferimento
di 2 cm per posizionare corret-
tamente lo strumento sul polso.
• Piegare la striscia di riferimento di
2 cm verticalmente lungo la linea
tratteggiata.
• Una volta acquisita familiarità con
il posizionamento dello strumento,
la striscia può essere rimossa.
2. Posizionare lo strumento sulla
parte interna del polso.
• Posizionare lo strumento a diretto
contatto con la pelle.
• Lo strumento può essere usato
da persone aventi una circon-
ferenza di polso compresa tra
12.5 e 22.0 cm.
3. Tenere il manicotto con il pol-
lice come mostrato in figura e
ripiegare all'indietro la chiusu-
ra e bloccarla.
(1) Abbassare il manicotto con il
pollice.
(2)
Stringere a fondo e fissare usando
la chiusura a gancio. Se il
manicotto è allentato, ciò può
causare valori di misura elevati.
Tirare la fibbia, senza torcerla, per
rimuovere l’unità dal polso.
EW3004EU_063.qxd 05.2.2 2:21 PM ページ 68